Add an Initiator to an iSCSI Initiator Group

  1. Choose Manage → Data Access.
  2. On the Initiator Group screen, click the name of the initiator group to which you want to add initiators.
  3. Click More Actions → Edit.
  4. In the Edit Initiator Group dialog box, click Add.
  5. (Optional) Enter a name for the initiator.
  6. Copy and paste the IQN of the client system into the IQN field.
    NOTE: If you cannot copy and paste the IQN, enter it very carefully.
  7. Enter the IP Address of the client system.
  8. Click Add.
  9. Repeat steps 4-7 for each initiator you want to add.
  10. When you are done adding initiators, click Save.