Rack Mount Safety Precautions
Observe these safety precautions when you install the Nimble array or expansion shelf in a rack.
Consideration | Precaution |
---|---|
Elevated Operating Temperature |
If the array or expansion shelf is installed in a closed or multi-unit rack assembly, the operating temperature may be greater than the ambient (room) temperature. Provide adequate cooling so the rack environment does not exceed 35°C (95°F) as specified by rack the manufacturer. For more information, refer to the Hardware Specifications section in the Nimble Storage Hybrid Flash Array Hardware Guide. |
Reduced Air Flow | Install the equipment in the rack such that each item has ample air flow required for proper cooling. |
Mechanical Loading | Mount the equipment so that the mechanical loads on the rack are even top-to-bottom, front-to-back, and side-to-side. |
Circuit Overloading | Be sure there is adequate power service to prevent overloading the circuits. Check the ratings of each item of equipment on each circuit. |
Reliable Grounding | You must provide reliable grounding (earthing) of rack-mounted equipment. In addition, pay attention to supply connections from the branch circuit, such as power strips. |