GUI Administration GuideSearch

Events and Alert Messages

Alert Configuration
Configuration
Alert/Event Severity Type Description/Possible Cause/Actions
10244 Warning Group

"Configuration synchronization to array delayed

will continue to retry"

10245 Information Group

"Configuration synchronization completed for array"

"Configuration synchronization completed on array %s"

10246 Warning Controller

"Group Leader Platform Configuration synchronization is delayed

will continue to retry"

10247 Information Controller

"Group Leader Configuration synchronization completed"

"Group Leader Configuration synchronization completed on active controller %s"

10248 Warning Controller

"Configuration synchronization to array delayed

will continue to retry"

10249 Information Controller

"Configuration synchronization completed for array"

"Configuration synchronization completed on array %s"

10267 Critical Group

"Encryption deactivated"

"Encryption deactivated. Encrypted volumes cannot be accessed or created. Enter encryption passphrase to reactivate."

10268 Information Group

"Encryption master key was deleted"

"Encryption master key was deleted. No data was lost because no encrypted volumes exist."

10269 Warning Group

"Encryption mode was changed to secure mode"

"Encryption mode was changed to secure mode. An array reboot will require passphrase entry."

10270 Warning Group

"Encryption mode was changed to available mode"

"Encryption mode was changed to available mode. An array reboot will not require passphrase entry."

10271 Information Group

"Encryption master key was created"

"Encryption master key was created. Encrypted volumes can now be created."

10272 Information Group

"Encryption passphrase was changed"

"Encryption passphrase was changed."

10273 Information Group

"Encryption cipher was changed"

"Encryption default cipher was changed to %s."

10274 Information Group

"Encryption scope was changed"

"Encryption default scope was changed to %s."

10275 Information Group

"Encryption activated"

"Encryption activated. Encrypted volumes can now be accessed and created."

10276 Warning Group

"Encrypted volume access may be slow"

"Array %s is a %s model. Encryption on this array may be slow."

10277 Critical Group

"Encryption master key was deleted"

"Encryption master key was deleted. Encrypted volumes are now permanently inaccessible."

10280 Warning Initiator Group

"Initiator group synchronization is delayed to arrays in the group"

"Initiator group %s synchronization is delayed to arrays in the group. ""Synchronization will be retried. Additional edits to initiator groups and creation of new access control records will fail during the delay. ""When synchronization succeeds

10281 Information Initiator Group

"Initiator group synchronization to arrays in the group succeeded"

"Initiator group %s synchronization to arrays in the group succeeded."

10500 Warning Group

"Object count reached maximum limit"

"Number of %s in %s has reached the maximum limit of %ld"

10501 Information Group

"Object count under maximum limit"

"Number of %s in %s is now under the maximum limit of %ld"

10502 Warning Group

"Object count over warning limit"

"Number of %s in %s has reached the warning limit of %ld"

10503 Information Group

"Object count under warning limit"

"Number of %s in %s is now under the warning limit of %ld"

10504 Warning Group

"Object count reached maximum limit."

"Number of %s %s in %s has reached the maximum limit of %s."

10505 Information Group

"Object count under maximum limit."

"Number of %s %s in %s is now under the maximum limit of %s."

10506 Warning Group

"Object count over warning threshold."

"Number of %s %s in %s has reached the warning threshold of %s."

10507 Information Group

"Object count under warning threshold."

"Number of %s %s in %s is now under the warning threshold limit of %s."

Alert Hardware
Hardware
Alert/Event Severity Type Description/Possible Cause/Actions
2022 Warning Controller

"Attempting controller failover"

"Attempting failover to active role because controller %s has %s."

2023 Warning Controller

"Controller could not complete failover"

"Attempted failover did not succeed. Check the %s on controller %s."

2024 Information Controller

"Controller failover occurred"

"Failover to active role occurred. Controller %s is now the active controller. Check %s on controller %s."

2028 Warning Controller

"Controller rebooted unexpectedly"

"Controller %s rebooted unexpectedly. Contact Nimble Storage Support."

12000 Critical Temperature

"Overtemperature shutdown"

"Overtemperature on controller % s

12001 Critical Temperature

"Controller overtemperature"

"Overtemperature on controller %s (%d Celsius)"

12002 Critical Temperature

"Backplane over-temperature"

"Overtemperature on backplane (%d Celsius)"

12003 Warning Array

"Flash memory in head shelf does not meet the minimum requirement"

"Amount of flash memory detected on head shelf does not meet the minimum requirement ""for this array model. Performance may be degraded. Check the SSDs for incompatible sizes or failures."

12004 Information Array

"Flash memory in head shelf meets the minimum requirement"

"Amount of flash memory detected on head shelf now meets the minimum requirement ""for this array model."

12100 Critical Disk

"Disk failed"

"Disk %s failed at slot % d

12101 Warning Disk

"Disk failed"

"Disk %s failed at slot %d"

12102 Warning Disk

"Disk missing"

"Disk %s missing at slot %d"

12103 Information Disk

"Disk added"

"Disk %s added at slot %d"

12104 Information Disk

"Disk removed"

"Disk %s at slot %d is removed by user using cli"

12105 Warning Disk

"SSD failed"

"SSD %s failed at slot %d"

12106 Warning Disk

"SSD missing"

"SSD %s missing at slot %d"

12107 Information Disk

"SSD added"

"SSD %s added at slot %d"

12108 Information Disk

"SSD removed"

"SSD %s at slot %d is removed by user using cli"

12109 Warning Disk

"Foreign disk detected"

"Disk %s is not being used

12110 Warning Disk

"Foreign SSD detected"

"SSD %s is not being used

12111 Warning Disk

"Invalid disk size for this model"

"Disk %s of size %d GB is ""not the right size for this model

12112 Warning Disk

"Disk failed"

"Disk %s failed on %s shelf %s at slot %d"

12113 Warning Disk

"Disk missing"

"Disk %s missing"

12114 Information Disk

"Disk added"

"Disk %s added on %s shelf %s at slot %d"

12115 Information Disk

"Disk removed"

"Disk %s on %s shelf %s at slot %d is removed by ""user using cli"

12116 Warning Disk

"SSD failed"

"SSD %s failed on %s shelf %s at slot %d"

12117 Warning Disk

"SSD missing"

"SSD %s missing"

12118 Information Disk

"SSD added"

"SSD %s added on %s shelf %s at slot %d"

12119 Information Disk

"SSD removed"

"SSD %s on %s shelf %s at slot %d is removed by ""user-issued CLI command"

12120 Critical Disk

"Only one SSD drive left"

"Only a single SSD drive is left in the system"

12121 Warning Disk

"Disk failed"

"Disk %s of capacity %dTB failed on %s shelf %s at slot %d."

12122 Information Disk

"Disk added"

"Disk %s of capacity %dTB added on %s shelf %s at slot %d."

12123 Information Disk

"Disk removed"

"Disk %s of capacity %dTB on %s shelf %s at slot %d was removed by ""user-issued CLI command."

12124 Warning Disk

"SSD failed"

"SSD %s of capacity %dGB failed on %s shelf %s at slot %d."

12125 Information Disk

"SSD added"

"SSD %s of capacity %dGB added on %s shelf %s at slot %d."

12126 Information Disk

"SSD removed"

"SSD %s of capacity %dGB on %s shelf %s at slot %d was removed by ""user-issued CLI command."

12127 Warning Disk

"Invalid disk size for this shelf"

"Disk %s of size %d GB is the wrong size on %s shelf %s at slot %d. ""This shelf needs a %d GB disk."

12128 Warning Disk

"Invalid SSD size for this shelf"

"SSD %s of size %d GB is the wrong size on %s shelf %s at slot %d. ""Replace SSD with supported model or contact Nimble Storage Support."

12129 Warning Disk

"Disk not supported on All Flash Shelf"

"Disk %s of size %d TB is not supported on All Flash Shelf %s at slot %d."

12130 Warning Disk

"Disk not supported on All-Flash Shelf"

"Disk %s of size %d TB is not supported on All-Flash Shelf %s at slot %d."

12131 Critical Disk

"No SSDs found"

"No SSDs found. This can cause performance degradation and possibly ""service outages. Insert functioning SSDs in the array and verify that the array recognizes ""the drives."

12132 Warning Disk

"Disk(s) inaccessible"

"One or more disks are inaccessible from controller %s. ""The disks may be missing or not responding. Failover and software ""updates may be affected. Contact Nimble Storage Support."

12133 Warning Disk

"Disk taken out of service for diagnosis"

"%s %s of capacity %s on %s shelf %s at slot %d ""is experiencing errors and is being temporarily taken out of service for inspection ""and attempted recovery. No action required at this time."

12134 Warning Disk

"SSD failed"

"SSD %s of capacity %dGB failed on %s shelf %s at slot %s."

12135 Information Disk

"SSD added"

"SSD %s of capacity %dGB added on %s shelf %s at slot %s."

12136 Information Disk

"SSD removed"

"SSD %s of capacity %dGB on %s shelf %s at slot %s was removed by ""user-issued CLI command."

12137 Warning Disk

"Invalid disk size for this shelf"

"Disk %s of size %d GB is the wrong size on %s shelf %s at slot %s. ""This shelf needs a %d GB disk."

12138 Warning Disk

"Invalid SSD size for this shelf"

"SSD %s of size %d GB is the wrong size on %s shelf %s at slot %s. ""Replace SSD with supported model or contact Nimble Storage Support."

12139 Warning Disk

"Disk not supported on All-Flash Shelf"

"Disk %s of size %d TB is not supported on All-Flash Shelf %s at slot %s."

12140 Warning Disk

"Disk taken out of service for diagnosis"

"%s %s of capacity %s on %s shelf %s at slot %s ""is experiencing errors and is being temporarily taken out of service for inspection ""and attempted recovery. No action required at this time."

12200 Warning NIC

"IP interface down"

"IP interface %s down on controller %s NIC port %s"

12201 Information NIC

"IP interface up"

"IP interface %s up on controller %s NIC port %s"

12202 Warning NIC

"Group IP interface unavailable"

"Group IP interface unavailable"

12203 Warning NIC

"All Data IP interfaces unavailable"

"All Data IP interfaces unavailable"

12204 Critical NIC

"IP connectivity lost

all links are down"

12205 Warning NIC

"Migrating subnet NIC configuration"

"NIC %s for subnet %s does not exist. Migrating configuration to NIC %s. Edit configuration if necessary."

12206 Warning NIC

"NIC for subnet missing"

"NIC %s for subnet %s does not exist. Edit configuration to ensure subnet is configured for an existing NIC."

12207 Warning NIC

"Migrating IP NIC configuration"

"NIC %s for IP %s does not exist. Migrating configuration to NIC %s. Edit configuration if necessary."

12208 Warning NIC

"NIC for IP missing"

"NIC %s for IP %s does not exist. Edit configuration to ensure IP is configured for an existing NIC."

12209 Warning NIC

"Migrating route NIC configuration"

"NIC %s for route %s gateway %s does not exist. Migrating configuration to NIC %s. Edit configuration if necessary."

12210 Warning NIC

"NIC for route missing"

"NIC %s for route %s gateway %s does not exist. Edit configuration to ensure route is configured for an existing NIC."

12211 Warning NIC

"Standby controller has better network connectivity. Failing services over to standby controller"

"Standby controller has better network connectivity. Failing services over to standby controller"

12212 Warning NIC

"Duplicate IP Address Detected"

"A duplicate of IP address %s is found in the network."

12213 Warning NIC

"Discovery IP interface unavailable"

"Discovery IP interface unavailable"

12214 Warning NIC

"Target IP interfaces unavailable"

"Target IP interfaces unavailable"

12215 Warning NIC

"Link down for Group IP interface(s)"

"Link down for Group IP interface(s)"

12216 Warning NIC

"Link down for Discovery IP interface(s)"

"Link down for Discovery IP interface(s)"

12217 Warning NIC

"Link down for Target IP interface(s)"

"Link down for Target IP interface(s)"

12218 Warning NIC

"Link down for Data IP interface(s)"

"Link down for Data IP interface(s)"

12219 Warning NIC

"Link down for iSCSI Data IP interface(s)"

"Link down for iSCSI Data IP interface(s)"

12220 Warning NIC

"Link down for cluster Data IP interface(s)"

"Link down for cluster Data IP interface(s)"

12221 Warning NIC

"Unresponsive NIC Port Detected"

"NIC Port %s is unresponsive."

12222 Critical NIC

"IP connectivity lost

all links down on a subnet"

12223 Critical NIC

"Network connectivity lost

all links down on a subnet"

12224 Warning NIC

"NIC migration failed"

"Migration of NIC port(s) %s failed. This could likely happen if array hardware updates resulted in reduced number of NICs."

12301 Warning Temperature

"Sensor: Alert raised"

"%s : Min %d Max %d (over %d hours %d mins) Last Reading %d"

12302 Information Temperature

"Sensor: Alert cleared"

"%s : Min %d Max %d (over %d hours %d mins) Last Reading %d"

12303 Warning Temperature

"Sensor: Alert raised"

"%s : failure "

12304 Information Temperature

"Sensor: Alert cleared"

"%s : failure cleared "

12305 Warning Temperature

"Sensor: is missing?: "

"%s"

12306 Warning NVRAM

"NVRAM battery is disabled"

"NVRAM Battery %d is disabled on controller %s"

12307 Critical NVRAM

"NVRAM batteries are disabled"

"NVRAM %d batteries are disabled on controller %s"

12308 Information NVRAM

"NVRAM battery is OK"

"NVRAM Battery %d is OK on controller %s"

12310 Warning Temperature

"System temperature is warm"

"current temperature for ""sensor at %s is %d C"

12311 Warning Temperature

"System temperature is cold"

"current temperature for ""sensor at %s is %d C"

12312 Information Temperature

"System temperature is ok"

"System temperature is now ""within range: current temperature for sensor at %s is %d C"

12313 Warning Temperature

"Temperature sensor failed"

"Temperature sensor at %s ""is not operational"

12314 Information Temperature

"Temperature sensor is ok"

"Temperature sensor at %s is ""operational: current temperature is %d C"

12315 Information Cooling Fan

"Fan in high speed"

"Fan at %s %s is running fast: ""current speed %d rpm"

12316 Information Cooling Fan

"Fan in low speed"

"Fan at %s %s is running slow: ""current speed %d rpm"

12317 Information Cooling Fan

"Fan is ok"

"Fan at %s %s is now running at speed ""%d rpm"

12318 Warning Cooling Fan

"Fan stopped"

"Fan at %s %s stopped working"

12319 Warning Cooling Fan

"Fan missing"

"Fan at %s %s is missing"

12320 Warning Power Supply

"Power supply fail"

"Power supply at %s is either not ""connected or failed"

12321 Warning Power Supply

"Power supply missing"

"Power supply at %s is missing"

12322 Information Power Supply

"Power supply is ok"

"Power supply at %s is ok"

12323 Warning Temperature

"System temperature is warm"

"current temperature for ""sensor \"%s\" at %s is %d C"

12324 Warning Temperature

"System temperature is cold"

"current temperature for ""sensor \"%s\" at %s is %d C"

12325 Information Temperature

"System temperature is ok"

"System temperature is now ""within range: current temperature for sensor \"%s\" at %s is ""%d C"

12326 Warning Temperature

"Temperature sensor failed"

"Temperature sensor \"%s\" ""at %s is not operational"

12327 Information Temperature

"Temperature sensor is ok"

"Temperature sensor \"%s\" ""at %s is operational: current temperature is %d C"

12328 Information Cooling Fan

"Fan in high speed"

"Fan \"%s\" at %s %s is running ""fast: current speed %d rpm"

12329 Information Cooling Fan

"Fan in low speed"

"Fan \"%s\" at %s %s is running ""slow: current speed %d rpm"

12330 Information Cooling Fan

"Fan is ok"

"Fan \"%s\" at %s %s is now running ""at speed %d rpm"

12331 Warning Cooling Fan

"Fan stopped"

"Fan \"%s\" at %s %s stopped working"

12332 Warning Cooling Fan

"Fan missing"

"Fan \"%s\" at %s %s is missing"

12333 Warning Power Supply

"Power supply fail"

"Power supply \"%s\" at %s is ""either not connected or failed"

12334 Warning Power Supply

"Power supply missing"

"Power supply \"%s\" at %s is ""missing"

12335 Information Power Supply

"Power supply is ok"

"Power supply \"%s\" at %s is ok"

12336 Warning Temperature

"System temperature is warm"

"current temperature for ""sensor \"%s\" on shelf \"%s\" at %s is %d C"

12337 Warning Temperature

"System temperature is cold"

"current temperature for ""sensor \"%s\" on shelf \"%s\" at %s is %d C"

12338 Information Temperature

"System temperature is OK"

"System temperature is now ""within range: current temperature for sensor \"%s\" on shelf \"%s\" at %s is ""%d C"

12339 Warning Temperature

"Temperature sensor failed"

"Temperature sensor \"%s\" ""on shelf \"%s\" at %s has failed"

12340 Information Temperature

"Temperature sensor is OK"

"Temperature sensor \"%s\" ""on shelf \"%s\" at %s is operational: current temperature is %d C"

12341 Information Cooling Fan

"Fan is at high speed"

"Fan \"%s\" on shelf \"%s\" at %s %s is running ""fast: current speed %d rpm"

12342 Information Cooling Fan

"Fan is at low speed"

"Fan \"%s\" on shelf \"%s\" at %s %s is running ""slow: current speed %d rpm"

12343 Information Cooling Fan

"Fan is OK"

"Fan \"%s\" on shelf \"%s\" at %s %s is now running ""at speed %d rpm"

12344 Warning Cooling Fan

"Fan stopped"

"Fan \"%s\" on shelf \"%s\" at %s %s stopped working"

12345 Warning Cooling Fan

"Fan missing"

"Fan \"%s\" on shelf \"%s\" at %s %s is missing"

12346 Warning Power Supply

"Power supply fail"

"Power supply \"%s\" on shelf \"%s\" at %s is ""not connected or has failed"

12347 Warning Power Supply

"Power supply missing"

"Power supply \"%s\" on shelf \"%s\" at %s is ""missing"

12348 Information Power Supply

"Power supply is OK"

"Power supply \"%s\" on shelf \"%s\" at %s is OK"

12601 Warning NVRAM

"NVRAM battery is charging"

"NVRAM battery is charging on controller %s"

12602 Information NVRAM

"NVRAM battery has finished charging"

"NVRAM battery has finished charging on controller %s"

12603 Critical NVRAM

"NVRAM version is incompatible"

"NVRAM version is incompatible with system firmware on controller %s"

12604 Error NVRAM

"NVRAM card multi-bit error (MBE) detected"

"The NVRAM memory content is corrupted on controller %s"

12605 Warning NVRAM

"NVRAM card single-bit error (SBE) detected"

"The NVRAM memory content is experiencing bit flips on controller %s"

12606 Error NVRAM

"NVRAM card non-correctable multi-bit error (MBE) detected"

"The NVRAM memory content has experienced a non-correctable bit flip error on controller %s"

12607 Warning NVRAM

"NVRAM card correctable single-bit error (SBE) detected"

"The NVRAM memory content has experienced a correctable bit flip error on controller %s"

12608 Information NVRAM

"NVDIMM reserved flash blocks reached the upper threshold"

"The reserved flash blocks have reached the upper threshold (remaining = %d) on controller %s."

12609 Warning NVRAM

"NVDIMM reserved flash blocks reached the lower threshold"

"The reserved flash blocks have reached the lower threshold (remaining = %d) on controller %s. Please contact Nimble Storage Support."

12610 Warning NVRAM

"NVDIMM ultracap cacapcitance discharged"

"The NVDIMM ultracap capacitance is discharged (remaining = %d) on controller %s"

12611 Critical NTB

"NTB_BAD_LINK"

"Controller %s %s in %s is higher than the threshold value of %d. Please Contact Nimble Storage Support."

12612 Warning NVRAM

"NVDIMM ultracap capacitance discharged"

"The NVDIMM ultracap capacitance is discharged (remaining = %d) on controller %s. Please Contact Nimble Storage Support."

12613 Critical NVRAM

"NVRAM module missing"

"NVRAM module is not detected on controller %s. Please contact Nimble Storage Support."

12614 Critical NVRAM

"NVDIMM ultracap capacitance discharged"

"The NVDIMM ultracap capacitance is discharged on controller %s. Data is unsafe if power is lost. ""If this situation continues for %d minutes

12615 Critical NVRAM

"Access to encrypted volumes denied"

"Access to encrypted volumes denied. You must re-enter the passphrase to access the encrypted volumes. If you have swapped out both controllers

12701 Warning Shelf

"Shelf controller connected to wrong side of host controller"

"Controller %s of Shelf location % s

12702 Error Shelf

"Shelf SES device not ready"

"SES device not ready for shelf serial %s location %s"

12703 Warning Shelf

"SAS link of a shelf slot is degraded"

"SAS link of shelf serial %s location %s slot %s is degraded"

12704 Warning Shelf

"Not enough disk in shelf"

"Shelf serial %s location %s does not have enough number of disks"

12705 Error Shelf

"System cannot read shelf serial number"

"System cannot read the serial number from shelf at location %s"

12706 Error Shelf

"SAS cable connected to wrong port"

"SAS cable s) that connected to shelf location %s is(are) connected to the wrong port(s

12707 Warning Shelf

"SAS link(s) between the shelves is(are) degraded"

"SAS link(s) between shelf location %s and %s is(are) degraded"

12708 Warning Shelf

"SAS expander error"

"SAS expander in shelf at location % s

12709 Error Shelf

"Shelf SAS loop detected"

"Both shelf controllers A and B are connected to the same head controller at location %s and %s. ""Ensure that each controller on the shelf is connected to its head unit equivalent (A or B)"

12710 Warning Shelf

"Shelf appear only on one side of host controllers"

"Shelf serial %s visible on host controller %s location %s but not on host controller % s

12711 Warning Shelf

"Shelf controller connection order mismatched"

"Shelf serial %s is at location %s on host controller A but at location %s on host controller B. ""Connect both controllers on each shelf to the head or shelf in the same order"

12712 Error Shelf

"Cannot access shelf SES device"

"Cannot access shelf SES device in the shelf serial %s at location % s

12713 Warning Shelf

"Controller failover due to shelf problem"

"Controller failover due to shelf problem"

12714 Information Shelf

"New Shelf detected"

"A new shelf is detected at location %s."

12715 Information Shelf

"Shelf is disconnected "

"Shelf at location % s

12716 Warning Shelf

"Shelf chassis swap detected"

"Shelf serial %s location %s replaced shelf serial %s"

12717 Warning Shelf

"Shelf daisy chain too long"

"Shelf serial %s location %s exceeds maximum supported daisy chain length"

12719 Information Shelf

"Connection to shelf is restored"

"SAS connection to shelf at location % s

12720 Warning Shelf

"SAS link disabled"

"SAS phy %s on shelf at location %s has excessive link error and has been disabled"

12721 Warning Shelf

"Excessive link error on disk"

"SAS link between disk sn %s and expander %s has excessive link error"

12730 Error Shelf

"SAS cable connected to wrong port"

"SAS cable s) that connected to shelf location %s is(are) connected to the wrong port(s

12731 Error Shelf

"Cannot access shelf SES device"

"Cannot access shelf SES device in the shelf serial %s at location % s

12732 Warning Shelf

"SAS link disabled"

"SAS phy %s on shelf at location %s has excessive link errors and has been disabled."

12733 Warning Shelf

"Excessive link error on disk"

"SAS link between disk S/N %s and expander %s has excessive link errors. Contact Nimble Storage Support."

12734 Warning Shelf

"SAS cable connected to wrong port"

"SAS cable s) that connected to shelf location %s is(are) connected to the wrong port(s

12735 Warning Shelf

"Cannot access shelf SES device"

"Cannot access shelf SES device in the shelf serial %s at location % s

12736 Warning Shelf

"Cannot access shelf SES device"

"Cannot access shelf SES device in the shelf serial %s at location % s

12738 Warning Shelf

"Cannot access shelf SES device"

"Cannot access shelf SES device in the shelf with S/N %s at location %s. Some sensor data ""may not be available. Contact Nimble Storage Support."

12740 Warning Shelf

"Cannot access shelf IPMI device"

"Cannot access shelf IPMI device in the shelf with S/N %s at location %s. Some sensor data ""may not be available. Contact Nimble Storage Support."

12741 Warning Shelf

"SAS cable connected to wrong port"

"SAS cable between shelf location %s and location %s is connected to wrong port."

12742 Warning Shelf

"Excessive link errors between disk and expander"

"There are excessive link errors on the SAS link between disk slot %s and expander ""in the shelf %s. Contact Nimble Storage Support."

12743 Warning Shelf

"Shelf bad interconnect phy"

"There are excessive link errors on the SAS link between %s and %s. ""Contact Nimble Storage Support."

12744 Warning Shelf

"Excessive link errors between shelves"

"There are excessive link errors on the SAS link between %s and %s. ""Contact Nimble Storage Support."

12901 Critical Controller

"Physical memory detected is less than installed"

"Physical memory detected is less than installed on array serial number %s controller %s. Installed %ld GB

14000 Information Array

"CS-Model changed"

"The CS-Model has changed. The model is now %s."

14001 Warning Array

"CS-Model unknown"

"The system cannot determine the CS-Model. The prior model was % s

14002 Warning Temperature

"The system temperature is beginning to exceed the allowable operating ""temperature. If it continues to exceed allowed operating temperature

""the system may shut down."

14003 Critical Temperature

"Controller shutdown occurred due to excessive temperature"

"Temperature exceeds maximum operating temperature (50 Celsius) on controller % s

14004 Critical Temperature

"Controller exceeds allowable operating temperature"

"Temperature exceeds allowable operating temperature on controller %s (%d Celsius)"

14005 Critical Temperature

"Backplane exceeds allowable operating temperature"

"Temperature exceeds allowable operating temperature on backplane (%d Celsius)"

14006 Warning Temperature

"System temperature is too high."

"Sensor %s on shelf %s at %s is %d Celsius. ""If any sensor exceeds 50 degrees C

14007 Critical Temperature

"System temperature continues to be high."

"Temperature Sensor on shelf %s is %d Celsius. ""If any sensor exceeds 50 degrees C

14008 Critical Power Supply

"Power supply down revisioned"

"While your shelf %s continues to function normally

14009 Critical Temperature

"Controller shutdown occurred due to excessive temperature"

"Temperature exceeds maximum operating temperature (%lu) on controller % s

14010 Critical Power Supply

"Power supply down revisioned"

"While your shelf %s continues to function normally

14011 Warning Temperature

"Array temperature is too high"

"Temperature sensor %s on shelf %s at %s is %d Celsius. ""Check air temperature and air flow around the array."

14012 Critical Temperature

"Array temperature continues to be high"

"Temperature sensor on shelf %s is %d Celsius. ""The shelf shuts down if it exceeds the maximum operating temperature."

14013 Critical Power Supply

"Power supply status unavailable"

"Array software is unable to query status of power supply units (PSUs). Although the shelf S/N %s continues to function normally

14014 Critical Power Supply

"Power supply status unavailable"

"Unable to query status of power supply units (PSUs). Although the shelf S/N %s continues to function normally

14015 Critical Temperature

"Array temperature continues to be high"

"Temperature sensor on shelf %s is %d Celsius which exceeds the safe operating temperature of %d Celsius. ""Do not operate shelf under elevated temperatures. To ensure data protection

14200 Error Controller

"An unknown firmware version was detected"

"An unknown firmware version was detected for component %s on controller %s"

14400 Information FC

"Fibre Channel link up"

"Fibre Channel link up on controller %s port %s"

14401 Warning FC

"Fibre Channel link down"

"Fibre Channel link down on controller %s port %s"

14402 Information FC

"Fibre Channel link not connected"

"Fibre Channel link not connected on controller %s port %s"

14403 Information FC

"Fibre Channel link up with connection to fabric"

"Fibre Channel link up with connection to fabric on controller %s port %s."

14404 Warning FC

"Fibre Channel link up with no connection to fabric"

"Fibre Channel link up with no connection to fabric on controller %s port %s. Check the switch log files for errors."

Alert Replication
Replication
Alert/Event Severity Type Description/Possible Cause/Actions
11000 Information Partner

"Replication succeeded"

"Successfully replicated snapshot collection %s ""to partner %s"

11001 Information Partner

"Excessive replication delay"

"Excessive delay replicating volume collection %s ""to partner %s"

11002 Warning Partner

"Excessive replication delay"

"Excessive delay replicating volume collection %s ""to partner %s"

11003 Warning Partner

"Partner synchronization failed"

"Failed to synchronize replication configuration ""to partner % s

11004 Warning Partner

"Volume replication stalled"

"Replication is stalled. Volume %s on partner %s must be removed ""in order to proceed"

11005 Information Partner

"Volume collection handover completed"

"Completed handover of volume collection %s"

11006 Warning Partner

"Replication between multi-array scaleout group"" and pre-scaleout array is not supported"

"Cannot replicate from/to the pre-2.x partner %s from a multi-array group"

11007 Warning Partner

"Replication between a scaleout group"" and pre-scaleout array must be configured over the management network"

"Cannot replicate from/to the pre-2.x partner %s over the data network."

11008 Error Partner

"Replication resynchronized"

"Successfully resynchronized while replicating snapshot %s on volume %s ""from partner %s. Prior snapshots for this volume may be out of sync. ""Please contact Nimble Storage Support."

11009 Warning Partner

"Resynchronization not supported"

"Downstream partner %s has requested resynchronization of replicated snapshots"" for volume %s. Please contact Nimble Storage Support for assistance."

11010 Warning Partner

"Resynchronization not supported"

"Volume %s needs resynchronization from upstream partner %s. ""Contact Nimble Storage Support."

11011 Error Partner

"Replication resynchronized"

"Successfully resynchronized while replicating snapshot %s on volume %s ""from partner %s. Prior snapshots for this volume may be out of sync. ""Contact Nimble Storage Support."

11012 Warning Partner

"Resynchronization not supported"

"Downstream partner %s has requested resynchronization of replicated snapshots"" for volume %s. Contact Nimble Storage Support."

11013 Warning Partner

"Partner authentication failed"

"Failed to authenticate with replication partner %s because partner secrets do not match."" Replication is currently paused. Edit the partner’s shared secret to resume replication."

11014 Warning Partner

"Replicated snapshot resynchronized"

"Successfully resynchronized replicated snapshot %s of volume %s ""from partner %s. Prior snapshots for this volume may not be synchronized. ""Contact Nimble Storage Support."

11015 Warning Partner

"Replicated snapshot resynchronization not supported"

"Downstream partner %s has requested resynchronization of replicated snapshots"" for volume %s. This group does not support resynchronization. Contact Nimble Storage Support."

11016 Warning Partner

"Replication partner authentication failed"

"Failed to authenticate with replication partner %s because shared secret does not match."" Replication is currently paused. Edit partner and match the shared secret to resume replication."

11017 Error Volume

"Replicated volume needs resynchronization"

"Snapshot %s of volume %s needs resynchronization from upstream partner. ""Contact Nimble Storage Support."

11018 Information Partner

"Volume collection handover aborted"

"Aborted handover of volume collection %s"

11019 Information Partner

"Volume collection handover completed with errors."

"Completed handover of volume collection % s

11020 Information Partner

"Volume collection handover aborted with errors."

"Aborted handover of volume collection % s

11021 Information Partner

"Volume collection could not be deleted on the downstream replication partner."

"Volume collection %s could not be deleted on the downstream replication partner and must be manually removed."

11022 Warning Volume

"Replication of volume is stalled due to space reclamation."

"Replication is stalled for volume %s of volume collection %s. Volume must be deleted on the downstream for replication to continue."

11023 Warning Volume

"Replication of volume is stalled due to space reclamation on common snapshot."

"Replication is stalled for volume %s of volume collection % s

11024 Warning Volume

"Replicated volume needs resynchronization"

"Replicated volume %s needs resynchronization from upstream partner. ""Resynchronization on volume %s has been initiated."

11025 Information Volume

"Replicated volume resynchronized"

"Successfully resynchronized replicated volume %s from partner %s."

Alert Security
Security
Alert/Event Severity Type Description/Possible Cause/Actions
14806 Warning Controller

"Root login succeeded."

"Root login to controller %s from %s succeeded."

14807 Critical Controller

"Root login failed."

"Root login to controller %s from %s failed."

14808 Warning Controller

"Login by nsupport succeeded"

"Login by nsupport to controller %s from %s succeeded."

14809 Critical Controller

"Login by nsupport failed"

"Login by nsupport to controller %s from %s failed."

14810 Warning Controller

"Elevating user privilege to root succeeded"

"Elevating user privilege from %s to root on controller %s succeeded."

14811 Critical Controller

"Elevating user privilege to root failed"

"Elevating user privilege from %s to root on controller %s failed."

14812 Note Group

"Login attempt by user without an assigned role"

"Login attempt by Active Directory user %s failed. The Active Directory group to which user belongs to is not associated with a role on the Nimble Storage group %s. Associate an Active Directory group the user belongs to with a role on Nimble Storage group. Ensure that the role has appropriate privileges before attempting to log in again."

Alert Service
Service
Alert/Event Severity Type Description/Possible Cause/Actions
0101 Warning Array

"Low writable space"

"The system is low on writable space. Write operations will be slowed. "

0102 Information Array

"Writable space reclaimed"

"Writable space is sufficient

0103 Critical Array

"Critically low writable space"

"The system is extremely low on writable space

0104 Warning Array

"High system utilization"

"The system is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

0105 Information Array

"System utilization OK"

"The system is down to %d%% utilization."

0106 Critical Array

"Critically high system utilization"

"The system is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

0107 Critical Array

"Critically low writable space"

"The system's writable space is extremely low. Application writes will be progressively slowed as writable space continues to decline."

0110 Critical Array

"Critically low writable space"

"The system's writable space is too low for write operations. Application writes will time out."

0111 Critical Array

"Critically low writable space"

"The array's writable space is extremely low. Application writes will be progressively slowed as writable space continues to decline."

0112 Critical Array

"Critically low writable space"

"The array's writable space is too low for write operations. Application writes will time out."

0113 Critical Array

"Critically high system utilization"

"The system is extremely low on space. Incoming writes will be denied."

0114 Critical Array

"Critically low space"

"The space on the array is extremely low. Application writes will be progressively slowed as writable space continues to decline."

0115 Information Array

"Writable space sufficiently restored"

"The space on the array has been sufficiently restored; write operations are back to normal speed."

0116 Critical Array

"Critically low space"

"The space on the array is too low for write operations. Application writes will time out."

2001 Critical Controller

"Unhandled controller exception"

"Unhandled exception on controller %s"

2002 Information Controller

"Controller takeover occurred"

"Takeover occurred on controller %s"

2003 Information Controller

"Standby controller available"

"Standby controller %s available"

2004 Warning Controller

"Standby controller not available"

"Standby controller %s not available"

2005 Critical Controller

"Excessive controller restarts detected"

"Excessive controller %s restarts detected"

2006 Critical Controller

"Restarting controller to recover service"

"Restarting controller %s to recover %s service"

2007 Information Controller

"Rebooting controller on user request"

"Rebooting controller %s on user request"

2008 Error Controller

"Failed to reboot controller per user request"

"Failed to reboot controller %s per user request"

2009 Information Controller

"Halting controller on user request"

"Halting controller %s on user request"

2010 Error Controller

"Failed to halt controller per user request"

"Failed to halt controller %s per user request"

2011 Information Controller

"Standby controller not available"

"Standby controller %s not available"

2012 Warning Controller

"Standby controller not available for an extended period"

"Standby controller %s not available for an extended period"

2013 Warning Controller

"Unhandled controller exception"

"Unhandled exception on controller %s"

2014 Critical Controller

"Unhandled controller exception

all services are down"

2015 Warning Controller

"Standby controller not available for an extended period"

"Standby controller %s not available for %d minutes"

2016 Critical Controller

"Standby controller not available for an extended period"

"Standby controller %s not available for %d minutes"

2017 Warning Controller

"Controller takeover occurred"

"Takeover occurred on controller %s"

2018 Information Controller

"Controller failover occurred"

"Failover occurred on controller %s"

2019 Information Controller

"Controller failover occurred"

"Failover of active role occurred on controller %s"

2020 Critical Controller

"Controller running with watchdog disabled"

"Watchdog disabled on controller %s. Disconnect all connected clients and contact Nimble Storage Support immediately."

2021 Information Controller

"Controller failover occurred"

"Failover of active role occurred on controller %s. Controller %s is now the active controller."

2025 Critical Controller

"Standby controller missing too many drives and cannot failover"

"Shelf serial %s standby controller %s missing too many drives and cannot failover."

2026 Warning Controller

"Standby controller performance degraded on failover; missing afs"

"Shelf serial %s standby controller %s performance degraded on failover; missing afs."

2027 Critical Controller

"Excessive controller restarts detected"

"Excessive controller restarts detected. Controller %s is starting up in degraded mode. Some processes will be disabled. Contact Nimble Storage Support."

2101 Information Service

"Service started"

"System services started. Software version is %s"

2102 Information Service

"Service stopped unexpectedly

restarting"

2103 Warning Service

"Service stopped unexpectedly

not restarting"

2104 Information Service

"Created secure tunnel to Nimble Storage support"

"Created secure tunnel to Nimble Storage support on controller %s"

2105 Information Service

"Tunnel to Nimble Storage support has been terminated"

"Tunnel to Nimble Storage support has been terminated on controller %s"

2106 Warning Service

"Service stopped unexpectedly"

"The %s stopped unexpectedly on the array

2107 Warning Service

"Service stopped unexpectedly"

"The %s stopped unexpectedly on the array

2108 Warning Service

"Failed to send alert e-mail"

"Failed to send e-mail to % s

2109 Warning Service

"Failed to send alert e-mail"

"Failed to send alert e-mail to SMTP server. Verify SMTP server and port configuration."

2110 Warning Service

"Service manually disabled"

"The %s was manually disabled on an array controller and will not be started."

2111 Information Service

"Created secure tunnel to Nimble Storage Support"

"Created secure tunnel to Nimble Storage Support on controller %s."

2112 Information Service

"Tunnel to Nimble Storage Support has been terminated"

"Tunnel to Nimble Storage Support has been terminated on controller %s."

10010 Critical Array

"A member array became unreachable"

"Member array %s became unreachable"

10011 Information Array

"A member array became reachable"

"Member array %s became reachable"

10012 Critical Array

"A member array is unreachable"

"Member array %s is unreachable"

10013 Information Array

"A member array is reachable"

"Member array %s is reachable"

10229 Error Pool

"Failed to assign array to pool"

"Failed to assign array %s to pool. Please retry after verifying that array is up and has network connectivity."

10230 Error Pool

"Failed to unassign array from pool"

"Failed to unassign array %s from pool. Please retry after verifying that array is up and has network connectivity."

10240 Error Pool

"Failed to merge pools."

"Failed to merge pool %s into pool. Please retry after verifying that all arrays in both pools are up and have network connectivity."

10252 Information Pool

"Completed unassign of array from pool"

"Completed unassign of array %s from pool. All data on the array has been moved to other arrays in the pool. The array can now be assigned to other pools or removed from the group."

10253 Information Pool

"Completed unassign of array from pool"

"Completed unassign of array %s from pool %s. All data on the array has been moved to other arrays in the pool. The array can now be assigned to other pools or removed from the group."

10256 Warning Pool

"Failed to assign array to pool"

"Failed to assign array %s to pool %s. Retry after verifying that array is up and has network connectivity."

10257 Warning Pool

"Failed to unassign array from pool"

"Failed to unassign array %s from pool %s. Retry after verifying that array is up and has network connectivity."

10260 Error Pool

"Failed to merge pools."

"Failed to merge pool %s into pool %s. Retry after verifying that all arrays in both pools are up and have network connectivity."

10282 Critical Volume

"Insufficient cache capacity in the pool for cache pinned volumes"

"Pinnable cache capacity %d MB in pool %s is insufficient to keep all cache pinned volumes in cache. Consider adding more cache or unpinning some volumes to restore performance guarantees for cache pinned volumes."

10401 Warning Array

"Used space above warning limit"

"The amount of used space has reached %d%% of free space"

10402 Information Array

"Used space below warning limits"

"The amount of used space is below %d%% of free space"

10403 Critical Array

"Used space above critical level"

"The amount of used space has reached a critical level at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted"

10404 Information Array

"Used space below critical limits"

"The amount of used space is at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted"

10405 Information Array

"Array space utilization OK"

"The Array is down to %d%% space utilization."

10406 Information Array

"High array space utilization"

"The array space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

10407 Warning Array

"High array space utilization"

"The array space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

10408 Critical Array

"Critically high array space utilization"

"The array space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

10409 Warning Pool

"Used space in the pool above warning limit"

"The amount of used space in the pool has reached %d%% of free space"

10410 Information Pool

"Used space in the pool below warning limits"

"The amount of used space in the pool is below %d%% of free space"

10411 Critical Pool

"Used space in the pool above critical level"

"The amount of used space in the pool has reached a critical level at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted"

10412 Information Pool

"Used space in the pool below critical limits"

"The amount of used space in the pool is at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted"

10413 Information Pool

"Pool space utilization OK"

"The pool is down to %d%% space utilization."

10414 Information Pool

"High pool space utilization"

"The pool space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

10415 Warning Pool

"High pool space utilization"

"The pool space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

10416 Critical Pool

"Critically high pool space utilization"

"The pool space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

10417 Warning Pool

"Used space in the pool above warning limit"

"The amount of used space in the pool %s has reached %d%% of free space."

10418 Information Pool

"Used space in the pool below warning limits"

"The amount of used space in the pool %s is below %d%% of free space."

10419 Critical Pool

"Used space in the pool above critical level"

"The amount of used space in the pool %s has reached a critical level at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted."

10420 Information Pool

"Used space in the pool below critical limits"

"The amount of used space in the pool %s is at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted."

10421 Information Pool

"Pool space utilization OK"

"The pool %s is down to %d%% space utilization."

10422 Information Pool

"High pool space utilization"

"The pool space in pool %s is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

10423 Warning Pool

"High pool space utilization"

"The pool space in pool %s is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

10424 Critical Pool

"Critically high pool space utilization"

"The pool space in pool %s is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage."

12400 Warning Raid

"RAID array degraded"

"RAID array degraded by %d %s"

12401 Information Raid

"RAID array rebuild started"

"RAID array started rebuilding disk %s"

12402 Information Raid

"RAID array rebuild is done"

"RAID array has successfully ""completed rebuilding disk %s"

12403 Warning Raid

"RAID array rebuild failed"

"Failed to rebuild RAID array on ""disk % s

12404 Warning Raid

"RAID array rebuild failed"

"Failed to rebuild RAID array on ""disk % s

12405 Warning Raid

"Disks missing from RAID array"

"%d %s missing from RAID ""array"

12406 Information Raid

"Disk marked as spare"

"Disk %s is marked as spare"

12407 Critical Raid

"Could not assemble RAID array"

"Could not assemble RAID array

12408 Warning Raid

"RAID array degraded"

"RAID array degraded by %d %s on %s shelf %s"

12409 Information Raid

"RAID array rebuild started"

"RAID array started rebuilding disk %s ""on %s shelf %s"

12410 Information Raid

"RAID array rebuild is done"

"RAID array has successfully ""completed rebuilding disk %s on %s shelf %s"

12411 Warning Raid

"RAID array rebuild failed"

"Failed to rebuild RAID array from ""%s shelf %s on disk % s

12412 Warning Raid

"RAID array rebuild failed"

"Failed to rebuild RAID array from ""%s shelf %s on disk % s

12413 Warning Raid

"Disks missing from RAID array"

"%d %s missing from RAID ""array on %s shelf %s"

12414 Information Raid

"Disk marked as spare"

"Disk %s is marked as spare on %s shelf %s"

12415 Critical Raid

"Could not assemble RAID array"

"Could not assemble RAID array on ""%s shelf % s

12416 Information Raid

"RAID array rebuild scheduled"

"RAID array rebuild scheduled on disk %s ""of %s shelf %s"

12417 Information Raid

"RAID array rebuild stopped"

"RAID array rebuild stopped on disk %s ""of %s shelf %s"

12418 Information Raid

"RAID array redundancy"

"RAID array on %s shelf %s now has %d/%d disks

12501 Warning iSCSI

"Too many iscsi connections"

"iscsi login rejected from %s"

12502 Warning iSCSI

"Too many unaligned iscsi reads/writes"

"unaligned reads/writes percentage %.2f%% "

12504 Warning iSCSI

"Too many iSCSI connections"

"iSCSI login rejected from %s"

12505 Warning iSCSI

"Too many unaligned iSCSI reads/writes"

"unaligned reads/writes percentage %.2f%% "

12506 Warning iSCSI

"Too many iSCSI connections"

"iSCSI login from %s is rejected"

12718 Information Shelf

"New shelf is activated"

"Shelf serial %s at location %d has been activated"

12737 Information Shelf

"New shelf is activated"

"Shelf serial %s at location %s has been activated"

12739 Information Shelf

"New shelf activated"

"Shelf with S/N %s at location %s was activated"

13501 Information Array

"Group Leader role takeover succeeded"

"Successfully takenover group leader role from array '%s' (serial: %s)"

13504 Information Array

"Group Leader role takeover succeeded"

"Array %s (serial: %s) successfully took over group leader role from array %s (serial: %s)"

13505 Information Array

"Group Leader role take over succeeded"

"Array %s S/N %s is now the group leader. Previous group leader was array %s S/N %s."

13506 Error Array

"Group Leader role migrate failed"

"Array %s S/N: %s failed to migrate group leader role to array %s S/N: %s."

13502 Error Array

"Group Leader role takeover has been rejected by a member array"

"Group Leader role takeover has been rejectec by member array '%s'"

13503 Error Array

"Group Leader role takeover has been rejected by a member array"

"Group Leader role takeover has been rejected by member array '%s'"

13601 Information Group

"Group merge completed successfully"

"Group merge with group %s completed successfully"

13602 Warning Group

"Failed to stop services on source group for group merge"

"Failed to stop services on source group %s for group merge. Group merge operation would be rolled back. Retry the operation later."

13603 Information Group

"Completed rollback of group merge operation"

"Completed rollback of group merge operation with group %s. Services on group %s have been resumed."

13604 Warning Group

"Group merge operation is not complete on some arrays

operation would be retried"

13605 Warning Group

"Failed to merge configuration from source group"

"Failed to merge configuration from source group %s. Group merge operation would be rolled back. Retry the operation later."

13701 Warning Group

"Data Migration is getting delayed because of continuous restarts"

"Data Migration is getting delayed because of continuous restarts. Contact Nimble Storage Support."

13702 Warning Group

"Data migration is delayed because of repeated restarts"

"Data migration is delayed because of repeated restarts. Contact Nimble Storage Support."

13703 Warning Group

"Data migration is delayed because of repeated errors"

"Data migration is delayed because of repeated errors. Contact Nimble Storage Support."

14700 Warning Service

"Oldest events removed from the system"

"Total number of events reached %lu. Maximum retention count is %lu. ""The oldest %lu events removed."

14701 Warning Service

"Events count reached warning threshold"

"Events count reached warning threshold of %lu events. If the number of events ""reaches the maximum retention count of % lu

14702 Warning Service

"Oldest audit log records removed from the system"

"Total number of audit log records reached %lu. Maximum retention count is %lu. ""The oldest %lu audit log records removed."

14703 Warning Service

"Audit log records count reached warning threshold"

"Audit log records count reached warning threshold of %lu. If the number of audit log records ""reaches the maximum retention count of % lu

14704 Information Service

"Oldest events removed from the system"

"Total number of events reached %lu. Maximum retention count is %lu. ""The oldest %lu events removed."

14705 Information Service

"Events count reached warning threshold"

"Events count reached warning threshold of %lu events. If the number of events ""reaches the maximum retention count of % lu

14706 Information Service

"Oldest audit log records removed from the system"

"Total number of audit log records reached %lu. Maximum retention count is %lu. ""The oldest %lu audit log records removed."

14707 Information Service

"Audit log records count reached warning threshold"

"Audit log records count reached warning threshold of %lu. If the number of audit log records ""reaches the maximum retention count of % lu

14800 Warning Controller

"Root Login succeeded."

"Root Login to controller %s from %s succeeded."

14801 Critical Controller

"Root Login failed."

"Root Login to controller %s from %s failed."

14802 Warning Group

"Active Directory client service on this group is not running"

"Active Directory client service on this group is not running. To restart the service

14803 Warning Group

"Active Directory Domain Controller is not reachable"

"Active Directory Domain Controller for domain %s is not reachable. Contact your Active Directory administrator."

14804 Warning Group

"Could not authenticate with Active Directory Domain Controller"

"Could not authenticate with Active Directory Domain Controller due to invalid credentials. Remove this group from the domain and retry join."

14805 Information Group

"Successfully communicated with Active Directory Domain Controller"

"Successfully communicated with Active Directory Domain Controller."

Alert Test
Test
Alert/Event Severity Type Description/Possible Cause/Actions
5000 DBG Test

"Test alert"

"Test message at debug level"

5001 Information Test

"Test alert"

"Test message at info level"

5002 Error Test

"Test alert"

"Test message at error level"

5003 Note Test

"Test alert"

"Test message at \"not\" level"

5004 Note Test

"Test alert"

"Test message at note level"

5005 Warning Test

"Test alert"

"Test message at warn level"

5006 Critical Test

"Test alert"

"Test message at critical level"

5007 Note Test

"Test alert"

"Test message at notice level"

5008 Information Test

"Test alert"

"Test recovery from warning alarm message"

5009 Information Test

"Test alert"

"Test recovery from critical alarm message"

Alert Unknown
Unknown
Alert/Event Severity Type Description/Possible Cause/Actions
10101 Information Array

"Cache cleared by user"

"Cache cleared by user"

Alert Update
Update
Alert/Event Severity Type Description/Possible Cause/Actions
6000 Error Controller

"Unpacking update package failed"

"Unpacking update package failed on controller %s: %s"

6001 Information Controller

"Software update started"

"Software update to version %s started on controller %s"

6002 Error Controller

"Reverting software to previous version"

"Reverting software to previous version %s on controller %s"

6003 Information Controller

"Successfully updated software"

"Successfully updated software to version %s on controller %s"

6004 Information Controller

"Rolling back software"

"Rolling back software to version %s on controller %s"

6005 Error Controller

"Update package pre-check failed"

"Update package Pre-check failed on controller %s"

6007 Error Array

"Software update failed"

"Software update failed: %s"

6008 Information Controller

"Unpacking update package"

"Unpacking version %s update package on controller %s"

6009 Information Controller

"Unpacked update package"

"Unpacked version %s update package on controller %s"

6010 Information Controller

"Software update reboot"

"%s on controller %s"

6011 Error Array

"Failed to download software update package"

"Failed to download software update package: %s"

6012 Error Controller

"Software update failed. \"/tmp\" is full"

"Software update failed. \"/tmp\" on controller %s is full"

6013 Error Controller

"Software update failed. scratch space is full"

"Software update failed. scratch space on controller %s is full"

6014 Error Controller

"Software update failed. \"/var\" is full"

"Software update failed. \"/var\" on controller %s is full"

6015 Error Controller

"Software update failed. Configuration space is full"

"Software update failed. Configuration space on controller %s is full"

6016 Error Controller

"Software update failed. Recovery OS space is full"

"Software update failed. Recovery OS space is full on controller %s is full"

6017 Error Controller

"Software update package was not found"

"Software update package %s was not found on controller %s"

6018 Error Controller

"Software update package has wrong signature"

"Software update package %s on %s controller %s has wrong signature"

6019 Error Controller

"Software update package has wrong checksum"

"Software update package %s on %s controller has wrong checksum"

6020 Error Controller

"Software update precheck failed. Network connectivity will degrade after software update"

"Software udpate precheck failed. Network connectivity will degrade on controller %s after software update"

6021 Error Controller

"Software update failed. Update cannot be applied while services cannot be failed over to other controller"

"Software update failed. Update cannot be applied while services cannot be failed over to other controller. ""Controller %s is not in standby mode and cannot take over services."

6022 Error Controller

"Software update cannot be applied."

"Software update cannot be applied. Controller %s is not in standby mode and cannot take over services that are required for a successful update."

6023 Error Controller

"Software update precheck failed. Network connectivity will degrade after software update"

"Software update precheck failed. Network connectivity will degrade on controller %s after software update"

6024 Error Controller

"Software update precheck failed. RAID assembly failed on standby controller and prevents software update to proceed"

"Software update precheck failed. RAID assembly failed on standby controller %s and prevents software update to proceed"

6025 Note Controller

"Software update started"

"Software update to version %s started on controller %s"

6026 Note Controller

"Successfully updated software"

"Successfully updated software to version %s on controller %s"

6401 Warning Array

"Software download failed due to DNS errors"

"Software download failed due to DNS lookup failure on controller %s for host %s"

6501 Warning Array

"Failed to contact a member array during software update"

"Failed to contact member %s during software update"

6502 Warning Array

"Failed to update software on a member array"

"Failed to update software on member array %s"

6503 Warning Array

"Software update on a member array timed out"

"Software update on member array %s timed out after %d minutes"

6504 Note Array

"Removed conflicting IQN that was added during software upgrade"

"Removed conflicting IQN %s that was added during software upgrade."

Alert Volume
Volume
Alert/Event Severity Type Description/Possible Cause/Actions
10200 Warning Volume

"Volume space usage over warning limit"

"Volume %s space usage is over the configured warning limit"

10201 Information Volume

"Volume space usage below warning limit"

"Volume %s space usage is now below the configured warning limit"

10202 Error Volume

"Volume space usage over quota"

"Volume %s space usage is over the configured quota"

10203 Information Volume

"Volume space usage below quota"

"Volume %s space usage is now below the configured quota"

10204 Warning Volume

"Volume snapshot space usage over warning limit"

"Volume %s snapshot space usage is over the configured warning limit"

10205 Information Volume

"Volume snapshot space usage below warning limit"

"Volume %s snapshot space usage is now below the configured warning limit"

10206 Error Volume

"Volume snapshot space usage over quota"

"Volume %s snapshot space usage is over the configured quota"

10207 Information Volume

"Volume snapshot space usage below quota"

"Volume %s snapshot space usage is now below the configured quota"

10208 Critical Volume

"Volume space usage approaching quota"

"Volume %s space usage is at %d%% and approaching quota of %d%%. It will be taken offline if it exceeds the quota"

10209 Information Volume

"Volume space usage below critical limit"

"Volume %s space usage at %d%% is below critical limit

10210 Critical Volume

"Volume snapshot space usage approaching quota"

"Volume %s snapshot space usage is at %d%% and approaching quota. It will be taken offline if it exceeds the quota"

10211 Information Volume

"Volume snapshot space usage below critical limit"

"Volume %s snapshot space usage at %d%% is below critical limit

10212 Critical Volume

"Volume being taken offline because it is above its quota"

"Volume %s is being taken offline because it is above its quota"

10213 Warning Volume

"The quota for volume is being set to 100%% because it is above its current quota"

"The quota for volume %s is being set to 100%% because it is above its quota. This is a one time action. Adjust volume quotas appropriately as the system now enforces volume quotas by taking offline volumes with space usage above quota"

10214 Critical Volume

"Volume being taken offline because it is above its snapshot quota"

"Volume %s is being taken offline because it is above its snapshot quota"

10215 Warning Volume

"The snapshot quota for volume is being set to unlimited because it is above its snapshot quota"

"The snapshot quota for volume %s is being set to unlimited because it is above its snapshot quota. This is a one time action. Adjust snapshot quotas appropriately as the system now enforces volume snapshot quotas by taking offline volumes with snapshot space usage above quota"

10216 Critical Volume

"Volume being taken offline because it is above its reserve and system is out of free space"

"Volume %s is being taken offline because it is above its reserve and system is out of free space"

10217 Warning Volume

"Volume reserve is being set to zero because it is above its reserve and system is out of free space"

"Volume %s reserve is being set to zero because it is above its reserve and system is out of free space. This is a one time action. Adjust volume reserves appropriately as the system now enforces volume reserves by taking offline volumes with space usage above their reserve when free space on the system is exhausted"

10218 Critical Volume

"Volume being taken offline because it is above its snapshot reserve and system is out of free space"

"Volume %s is being taken offline because it is above its snapshot reserve and system is out of free space"

10219 Warning Volume

"Volume snapshot reserve is being set to zero because it is above its reserve and system is out of free space"

"Volume %s snapshot reserve is being set to zero because it is above its reserve and system is out of free space. This is a one time action. Adjust volume snapshot reserves appropriately as the system now enforces snapshot reserves by taking offline volumes with snapshot space usage above reserve when system is out of free space"

10220 Warning Volume

"Volume space usage over warning limit"

"Volume %s space usage at %d%% is over the configured warning limit of %d%%"

10221 Information Volume

"Volume space usage below warning limit"

"Volume %s space usage at %d%% is now below the configured warning limit of %d%%"

10222 Critical Volume

"Volume space usage is over the configured quota"

"Volume %s space usage at %d%% is over the configured quota at %d%%"

10223 Information Volume

"Volume space usage is now below the configured quota"

"Volume %s space usage at %d%% is now below the configured warning limit of %d%%"

10224 Warning Volume

"Volume snapshot space usage over warning limit"

"Volume %s snapshot space usage is over the configured warning limit"

10225 Information Volume

"Volume snapshot space usage below warning limit"

"Volume %s snapshot space usage is now below the configured warning limit"

10226 Critical Volume

"Volume snapshot space usage over quota"

"Volume %s snapshot space usage is over the configured quota"

10227 Information Volume

"Volume snapshot space usage below quota"

"Volume %s snapshot space usage is now below the configured quota"

10228 Warning Volume

"Volume attributes synchronization to arrays in the pool delayed"

"Volume %s attributes synchronization to arrays in the pool delayed. Will retry"

10231 Warning Volume

"Volume space usage approaching quota"

"Volume %s space usage is at %d%% and approaching quota of %d%%."

10232 Warning Volume

"Volume snapshot space usage approaching quota"

"Volume %s snapshot space usage is at %d%% and approaching quota."

10233 Warning Volume

"Volume space usage is above its reserve"

"Volume %s space usage at %d%% is above its reserve at %d%%. It will be taken offline once the free space has been exhausted."

10234 Information Volume

"Volume space usage is below its reserve"

"Volume %s space usage at %d%% is below its reserve at %d%%."

10235 Warning Volume

"Volume snapshot space usage is above its reserve"

"Volume %s snapshot space usage at %d%% is above its snapshot reserve at %d%%. It will be taken offline once the free space has been exhausted."

10236 Information Volume

"Volume snapshot space usage is below its reserve"

"Volume %s snapshot space usage at %d%% is below its snapshot reserve at %d%%."

10241 Information Volume

"Volume attributes synchronization to arrays in the pool succeeded"

"Volume %s attributes synchronization to arrays in the pool succeeded."

10242 Warning Volume

"Snapshot attributes synchronization to arrays in the pool delayed"

"Snapshot %s in Volume %s attributes synchronization to arrays in the pool delayed. Will retry"

10243 Information Volume

"Snapshot attributes synchronization to arrays in the pool succeeded"

"Snapshot %s in Volume %s attributes synchronization to arrays in the pool succeeded."

10250 Information Volume

"Volume completed move to destination pool"

"Volume %s completed move to destination pool %s. Volume data is now on destination pool."

10251 Information Volume

"Volume completed aborting move to destination pool"

"Volume %s completed aborting move to destination pool %s. Volume data has been moved back to source pool %s."

10261 Critical Volume

"Volume space usage approaching volume quota"

"Volume %s space usage is at %d%% and approaching volume quota of %d%%. It will be set to non-writable if it exceeds the volume quota."

10262 Critical Volume

"Volume being set to non-writable because it is above its volume quota"

"Volume %s is being set to non-writable because it is above its volume quota."

10263 Critical Volume

"Volume snapshot space usage approaching snapshot quota"

"Volume %s snapshot space usage is at %d%% and approaching snapshot quota. It will be set to non-writable if it exceeds the snapshot quota."

10264 Critical Volume

"Volume being set to non-writable because it is above its snapshot quota"

"Volume %s is being set to non-writable because it is above its snapshot quota."

10265 Critical Volume

"Volume being set to non-writable because it is above its reserve and system is out of free space"

"Volume %s is being set to non-writable because it is above its reserve and system is out of free space"

10266 Critical Volume

"Volume being set to non-writable because it is above its snapshot reserve and system is out of free space"

"Volume %s is being set to non-writable because it is above its snapshot reserve and system is out of free space"

10278 Critical Volume

"Invalid volume serial number detected"

"Volume %s is being taken offline because it is ""using an invalid serial number %s. Contact ""Nimble Storage Support."

10279 Critical Volume

"Invalid snapshot serial number detected"

"Snapshot %s of volume %s is being taken offline because it is ""using an invalid serial number %s. Contact Nimble Storage Support."

10283 Warning Folder

"Folder attributes synchronization to arrays in the pool delayed"

"Folder %s attributes synchronization to arrays in the pool delayed. Will retry"

10284 Information Folder

"Folder attributes synchronization to arrays in the pool succeeded"

"Folder %s attributes synchronization to arrays in the pool succeeded."

10300 Information Protection Set

"Scheduled snapshot succeeded"

"Successfully snapshoted volumes associated with ""volume collection %s schedule %s"

10301 Warning Protection Set

"Scheduled snapshot failed"

"Failed to snapshot volumes associated with volume collection %s ""schedule % s

10302 Information Protection Set

"Scheduled snapshot skipped"

"Skipped scheduled snapshot collection % s

10303 Information Protection Set

"Scheduled snapshot skipped"

"Skipped scheduled snapshot on volumes associated with ""volume collection %s schedule % s

10304 Information Protection Set

"Scheduled snapshot succeeded"

"Successfully snapshoted volumes associated with ""volume collection %s schedule % s

10305 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the system is unable to log into the vCenter ""server due to an incorrect user name %s or password. Verify the ""user name and password are correct."

10306 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the connection to the vCenter server %s timed ""out. Verify the vCenter server name and IP address."

10307 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because vCenter server %s refused the connection."

10308 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because vCenter server %s is disconnected from the ""Nimble Protection Manager."

10309 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because no route was found to vCenter server %s."

10310 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the socket read from vCenter server %s timed out."

10311 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the network is unreachable."

10312 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because snapshots are disabled. Some VMWare products

10313 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because %s does not exist."

10314 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because %s does not have permission to perform the ""operation. Configure user with the proper permissions or log in as a ""user with such permissions."

10315 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the system was unable to look up the vCenter ""server %s. Verify the vCenter server name or IP address."

10316 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s due to an encoding error

10317 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the server socket was closed before a reply ""was written."

10318 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because no Datacenter exists."

10319 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because Nimble volume serial number is empty."

10320 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s due to an unexpected error."

10321 Warning Protection Set

"Scheduled snapshot succeeded with warning"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the VMFS datastore block size is not large enough ""to accommodate the files in the VM. For VMFS-5 datastore the maximum file ""size is 2TB minus 512 bytes. For the VMFS-3 datastore the maximum file ""size will depend on the block size of the datastore."

10322 Information Protection Set

"Scheduled snapshot succeeded"

"Successfully created snapshot of volumes associated with ""volume collection %s schedule %s"

10323 Information Protection Set

"Scheduled snapshot succeeded"

"Successfully created snapshot of volumes associated with ""volume collection %s schedule % s

10324 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because snapshots are disabled. Some VMware products

10325 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s since the vCenter virtual machine snapshot tasks have not yet completed."

10326 Warning Protection Set

"Scheduled snapshot failed"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the snapshot name exceeds the maximum allowable ""length on vCenter. Shorten the volume collection name or schedule name."

10327 Information Protection Set

"Application synchronization failed"

"Application synchronization failed for volume collection %s ""schedule % s

10328 Warning Protection Set

"Scheduled snapshot failed."

"Failed to snapshot volumes associated with volume collection % s

10340 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because %s does not have permission to perform the ""operation. Configure user with the proper permissions or log in as a ""user with such permissions."

10341 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because %s does not exist."

10342 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s due to an encoding error

10343 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because the server socket was closed before a reply ""was written."

10344 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because no Datacenter exists."

10345 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because Nimble volume serial number is empty."

10346 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s due to an unexpected error."

10347 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because the VMFS datastore block size is not large enough ""to accommodate the files in the VM. For VMFS-5 datastore the maximum file ""size is 2TB minus 512 bytes. For the VMFS-3 datastore the maximum file ""size will depend on the block size of the datastore."

10348 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because snapshots are disabled. Some VMware products

10349 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s since the vCenter virtual machine ""snapshot tasks have not yet completed."

10350 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because the snapshot name exceeds ""the maximum allowable length on vCenter. Shorten the volume collection ""name or schedule name."

10351 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because virtual machine tools ""in the guest are not running."

10352 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the IP address or hostname %s is not a valid ""vCenter server."

10353 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s. Too many vCenter synchronized snapshots are currently in progress. ""Stagger the schedules for vCenter synchronized snapshots."

10354 Warning Protection Set

"Scheduled snapshot failed"

"Failed to create VSS synchronized snapshot associated with volume collection %s ""schedule %s. Incompatible version of Nimble VSS service on the application server."

10355 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the system is unable to log into the vCenter ""server due to an incorrect user name %s or password. Verify the ""user name and password are correct."

10356 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the connection to the vCenter server %s timed ""out. Verify the vCenter server name and IP address."

10357 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because vCenter server %s refused the connection."

10358 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because vCenter server %s is disconnected from the ""Nimble Protection Manager."

10359 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because no route was found to vCenter server %s."

10360 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the socket read from vCenter server %s timed out."

10361 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the network is unreachable."

10362 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the system was unable to look up the vCenter ""server %s. Verify the vCenter server name or IP address."

10363 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s due to an unexpected connection error."

10364 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s since the vCenter virtual machine snapshot tasks have not yet completed."

10365 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s due to an unexpected error."

10366 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s due to an unexpected error. ""See vSphere Client to get details on the failure of the snapshot task for this VM."

10367 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s due to failure to quiesce the virtual machine. ""See vSphere Client to get details on the failure of the snapshot task for this VM."

10368 Warning Protection Set

"Failed to synchronize with VMware vCenter"

"Failed to %s vCenter snapshot associated with volume collection %s schedule %s for virtual machine %s due to a retained snapshot. For a given volume collection and schedule

10380 Warning Protection Set

"Scheduled VSS snapshot failed."

"Failed to create snapshot of volumes associated with volume collection %s ""schedule %s because of VSS writer failure. %s"

10381 Warning Protection Set

"VSS synchronization failed for some of the application objects."

"Successfully created snapshot of volumes associated with volume collection %s ""Schedule %s. However

10382 Warning Protection Set

"Scheduled VSS snapshot failed."

"Failed to create snapshot of volumes associated with volume collection %s ""schedule %s because of a configuration error. %s"

10383 Warning Protection Set

"Scheduled VSS snapshot failed."

"Failed to create snapshot of volumes associated with volume collection %s ""schedule %s because of an error during snapshot verification process. %s"

10384 Warning Protection Set

"Scheduled VSS snapshot failed."

"Failed to create snapshot of volumes associated with volume collection %s ""schedule %s. %s"

10385 Warning Protection Set

"Scheduled VSS snapshot failed."

"Failed to create snapshot of volumes associated with volume collection %s ""schedule %s. %s"

10386 Warning Protection Set

"Scheduled VSS snapshot failed."

"Failed to create snapshot of volumes associated with volume collection %s ""schedule %s. %s"

12500 Information iSCSI

"Multi initiator login"

"iscsi login to volume %s rejected from %s - existing session from %s"

12503 Information iSCSI

"Multi initiator login"

"iSCSI login to volume %s rejected from %s - existing session from %s"

12057 Error iSCSI

"iSCSI connections from initiator repeatedly closed by array due to improper target ""IP configuration"

"iSCSI connections from initiator %s on volume %s repeatedly closed by array due to ""improper target IP configuration. Review iSCSI connection settings on initiator ""and use the correct target IP. Consider using Nimble Connection Manager to manage ""initiator connections"

12508 Error iSCSI

"iSCSI connections from initiator repeatedly closed by array due to improper target ""IP configuration"

"iSCSI connections with source IP %s and destination IP %s from initiator %s on ""volume %s repeatedly closed by the array. Review iSCSI connection settings on the initiator ""and use the correct target IP."

13101 Warning Array

"Total number of volumes approaching system limit"

"Total number of volumes is %ld which is approaching system limit of %ld"

13102 Information Array

"Total number of volumes below warning threshold"

"Total number of volumes is %ld which is below warning threshold of %ld"

14850 Information Volume

"Volume fully pinned in cache"

"Volume %s fully pinned in cache."

14851 Information Array

"Pinning of cache pinned volumes may have been affected by a Data Service restart"

"Pinning of cache pinned volumes on array %s may have been affected by a Data Service restart. Blocks in any affected cache pinned volumes are being restored to cache."

14852 Information Array

"Pinning of cache pinned volumes may have been affected by an SSD loss"

"Pinning of cache pinned volumes on array %s may have been affected by an SSD loss. Blocks in any affected cache pinned volumes are being restored to cache

14853 Warning Array

"Pinning of cache pinned volumes may have been affected by an internal error"

"Pinning of cache pinned volumes on array %s may have been affected by an internal error. Contact Nimble Storage Support."

14854 Information Array

"Blocks in any affected cache pinned volumes have been restored to cache"

"Blocks in any affected cache pinned volumes on array %s have been restored to cache."

14855 Warning Array

"Pinning of cache pinned volumes has been affected by an SSD loss"

"Pinning of cache pinned volumes on array %s has been affected by an SSD loss. Consider replacing SSD or unpinning some volumes."