Events and Alert Messages
Configuration | |||
---|---|---|---|
Alert/Event | Severity | Type | Description/Possible Cause/Actions |
10244 | Warning | Group |
"Configuration synchronization to array delayed will continue to retry" |
10245 | Information | Group |
"Configuration synchronization completed for array" "Configuration synchronization completed on array %s" |
10246 | Warning | Controller |
"Group Leader Platform Configuration synchronization is delayed will continue to retry" |
10247 | Information | Controller |
"Group Leader Configuration synchronization completed" "Group Leader Configuration synchronization completed on active controller %s" |
10248 | Warning | Controller |
"Configuration synchronization to array delayed will continue to retry" |
10249 | Information | Controller |
"Configuration synchronization completed for array" "Configuration synchronization completed on array %s" |
10267 | Critical | Group |
"Encryption deactivated" "Encryption deactivated. Encrypted volumes cannot be accessed or created. Enter encryption passphrase to reactivate." |
10268 | Information | Group |
"Encryption master key was deleted" "Encryption master key was deleted. No data was lost because no encrypted volumes exist." |
10269 | Warning | Group |
"Encryption mode was changed to secure mode" "Encryption mode was changed to secure mode. An array reboot will require passphrase entry." |
10270 | Warning | Group |
"Encryption mode was changed to available mode" "Encryption mode was changed to available mode. An array reboot will not require passphrase entry." |
10271 | Information | Group |
"Encryption master key was created" "Encryption master key was created. Encrypted volumes can now be created." |
10272 | Information | Group |
"Encryption passphrase was changed" "Encryption passphrase was changed." |
10273 | Information | Group |
"Encryption cipher was changed" "Encryption default cipher was changed to %s." |
10274 | Information | Group |
"Encryption scope was changed" "Encryption default scope was changed to %s." |
10275 | Information | Group |
"Encryption activated" "Encryption activated. Encrypted volumes can now be accessed and created." |
10276 | Warning | Group |
"Encrypted volume access may be slow" "Array %s is a %s model. Encryption on this array may be slow." |
10277 | Critical | Group |
"Encryption master key was deleted" "Encryption master key was deleted. Encrypted volumes are now permanently inaccessible." |
10280 | Warning | Initiator Group |
"Initiator group synchronization is delayed to arrays in the group" "Initiator group %s synchronization is delayed to arrays in the group. ""Synchronization will be retried. Additional edits to initiator groups and creation of new access control records will fail during the delay. ""When synchronization succeeds |
10281 | Information | Initiator Group |
"Initiator group synchronization to arrays in the group succeeded" "Initiator group %s synchronization to arrays in the group succeeded." |
10285 | Critical | Group |
"Volume being taken offline because folder usage is over the folder overdraft limit." "Volume {volume_name} is being taken offline because folder {folder_name,folder_uid} usage is above the folder overdraft limit. Folder current usage {usage}, Folder overdraft limit X Mib." |
10286 | Critical | Group |
"Volume being set to non-writable because folder usage is over the folder overdraft limit." "Volume {volume_name} is being set to non-writable because folder {folder_name,folder_uid} usage is above the folder overdraft limit. Folder current usage {usage}, Folder overdraft limit X Mib" |
10287 | Critical | Group |
"Critically high folder space utilization" "The folder {folder_name} used space with usage limit {usage_limit} Mib and in pool {pool_name} is currently {X}% full." |
10288 | Warning | Group |
"High folder space utilization" "The folder {folder_name} used space with usage limit {usage_limit} Mib and in pool {pool_name} is currently {X}% full." |
10289 | Information | Group |
"High folder space utilization" "The folder {folder_name} used space with usage limit {usage_limit} Mib and in pool {pool_name} is currently {X}% full." |
10290 | Information | Group |
"Folder space utilization OK" "The folder %s used space with usage limit {usage_limit} Mib and in pool {pool_name} is down to {X}% space utilization." |
10500 | Warning | Group |
"Object count reached maximum limit" "Number of %s in %s has reached the maximum limit of %ld" |
10501 | Information | Group |
"Object count under maximum limit" "Number of %s in %s is now under the maximum limit of %ld" |
10502 | Warning | Group |
"Object count over warning limit" "Number of %s in %s has reached the warning limit of %ld" |
10503 | Information | Group |
"Object count under warning limit" "Number of %s in %s is now under the warning limit of %ld" |
10504 | Warning | Group |
"Object count reached maximum limit." "Number of %s %s in %s has reached the maximum limit of %s." |
10505 | Information | Group |
"Object count under maximum limit." "Number of %s %s in %s is now under the maximum limit of %s." |
10506 | Warning | Group |
"Object count over warning threshold." "Number of %s %s in %s has reached the warning threshold of %s." |
10507 | Information | Group |
"Object count under warning threshold." "Number of %s %s in %s is now under the warning threshold limit of %s." |
Hardware | |||
---|---|---|---|
Alert/Event | Severity | Type | Description/Possible Cause/Actions |
2022 | Warning | Controller |
"Attempting controller failover" "Attempting failover to active role because controller %s has %s." |
2023 | Warning | Controller |
"Controller could not complete failover" "Attempted failover did not succeed. Check the %s on controller %s." |
2024 | Information | Controller |
"Controller failover occurred" "Failover to active role occurred. Controller %s is now the active controller. Check %s on controller %s." |
2028 | Warning | Controller |
"Controller rebooted unexpectedly" "Controller %s rebooted unexpectedly. Contact Nimble Storage Support." |
12000 | Critical | Temperature |
"Overtemperature shutdown" "Overtemperature on controller % s |
12001 | Critical | Temperature |
"Controller overtemperature" "Overtemperature on controller %s (%d Celsius)" |
12002 | Critical | Temperature |
"Backplane over-temperature" "Overtemperature on backplane (%d Celsius)" |
12003 | Warning | Array |
"Flash memory in head shelf does not meet the minimum requirement" "Amount of flash memory detected on head shelf does not meet the minimum requirement ""for this array model. Performance may be degraded. Check the SSDs for incompatible sizes or failures." |
12004 | Information | Array |
"Flash memory in head shelf meets the minimum requirement" "Amount of flash memory detected on head shelf now meets the minimum requirement ""for this array model." |
12100 | Critical | Disk |
"Disk failed" "Disk %s failed at slot % d |
12101 | Warning | Disk |
"Disk failed" "Disk %s failed at slot %d" |
12102 | Warning | Disk |
"Disk missing" "Disk %s missing at slot %d" |
12103 | Information | Disk |
"Disk added" "Disk %s added at slot %d" |
12104 | Information | Disk |
"Disk removed" "Disk %s at slot %d is removed by user using cli" |
12105 | Warning | Disk |
"SSD failed" "SSD %s failed at slot %d" |
12106 | Warning | Disk |
"SSD missing" "SSD %s missing at slot %d" |
12107 | Information | Disk |
"SSD added" "SSD %s added at slot %d" |
12108 | Information | Disk |
"SSD removed" "SSD %s at slot %d is removed by user using cli" |
12109 | Warning | Disk |
"Foreign disk detected" "Disk %s is not being used |
12110 | Warning | Disk |
"Foreign SSD detected" "SSD %s is not being used |
12111 | Warning | Disk |
"Invalid disk size for this model" "Disk %s of size %d GB is ""not the right size for this model |
12112 | Warning | Disk |
"Disk failed" "Disk %s failed on %s shelf %s at slot %d" |
12113 | Warning | Disk |
"Disk missing" "Disk %s missing" |
12114 | Information | Disk |
"Disk added" "Disk %s added on %s shelf %s at slot %d" |
12115 | Information | Disk |
"Disk removed" "Disk %s on %s shelf %s at slot %d is removed by ""user using cli" |
12116 | Warning | Disk |
"SSD failed" "SSD %s failed on %s shelf %s at slot %d" |
12117 | Warning | Disk |
"SSD missing" "SSD %s missing" |
12118 | Information | Disk |
"SSD added" "SSD %s added on %s shelf %s at slot %d" |
12119 | Information | Disk |
"SSD removed" "SSD %s on %s shelf %s at slot %d is removed by ""user-issued CLI command" |
12120 | Critical | Disk |
"Only one SSD drive left" "Only a single SSD drive is left in the system" |
12121 | Warning | Disk |
"Disk failed" "Disk %s of capacity %dTB failed on %s shelf %s at slot %d." |
12122 | Information | Disk |
"Disk added" "Disk %s of capacity %dTB added on %s shelf %s at slot %d." |
12123 | Information | Disk |
"Disk removed" "Disk %s of capacity %dTB on %s shelf %s at slot %d was removed by ""user-issued CLI command." |
12124 | Warning | Disk |
"SSD failed" "SSD %s of capacity %dGB failed on %s shelf %s at slot %d." |
12125 | Information | Disk |
"SSD added" "SSD %s of capacity %dGB added on %s shelf %s at slot %d." |
12126 | Information | Disk |
"SSD removed" "SSD %s of capacity %dGB on %s shelf %s at slot %d was removed by ""user-issued CLI command." |
12127 | Warning | Disk |
"Invalid disk size for this shelf" "Disk %s of size %d GB is the wrong size on %s shelf %s at slot %d. ""This shelf needs a %d GB disk." |
12128 | Warning | Disk |
"Invalid SSD size for this shelf" "SSD %s of size %d GB is the wrong size on %s shelf %s at slot %d. ""Replace SSD with supported model or contact Nimble Storage Support." |
12129 | Warning | Disk |
"Disk not supported on All Flash Shelf" "Disk %s of size %d TB is not supported on All Flash Shelf %s at slot %d." |
12130 | Warning | Disk |
"Disk not supported on All-Flash Shelf" "Disk %s of size %d TB is not supported on All-Flash Shelf %s at slot %d." |
12131 | Critical | Disk |
"No SSDs found" "No SSDs found. This can cause performance degradation and possibly ""service outages. Insert functioning SSDs in the array and verify that the array recognizes ""the drives." |
12132 | Warning | Disk |
"Disk(s) inaccessible" "One or more disks are inaccessible from controller %s. ""The disks may be missing or not responding. Failover and software ""updates may be affected. Contact Nimble Storage Support." |
12133 | Warning | Disk |
"Disk taken out of service for diagnosis" "%s %s of capacity %s on %s shelf %s at slot %d ""is experiencing errors and is being temporarily taken out of service for inspection ""and attempted recovery. No action required at this time." |
12134 | Warning | Disk |
"SSD failed" "SSD %s of capacity %dGB failed on %s shelf %s at slot %s." |
12135 | Information | Disk |
"SSD added" "SSD %s of capacity %dGB added on %s shelf %s at slot %s." |
12136 | Information | Disk |
"SSD removed" "SSD %s of capacity %dGB on %s shelf %s at slot %s was removed by ""user-issued CLI command." |
12137 | Warning | Disk |
"Invalid disk size for this shelf" "Disk %s of size %d GB is the wrong size on %s shelf %s at slot %s. ""This shelf needs a %d GB disk." |
12138 | Warning | Disk |
"Invalid SSD size for this shelf" "SSD %s of size %d GB is the wrong size on %s shelf %s at slot %s. ""Replace SSD with supported model or contact Nimble Storage Support." |
12139 | Warning | Disk |
"Disk not supported on All-Flash Shelf" "Disk %s of size %d TB is not supported on All-Flash Shelf %s at slot %s." |
12140 | Warning | Disk |
"Disk taken out of service for diagnosis" "%s %s of capacity %s on %s shelf %s at slot %s ""is experiencing errors and is being temporarily taken out of service for inspection ""and attempted recovery. No action required at this time." |
12200 | Warning | NIC |
"IP interface down" "IP interface %s down on controller %s NIC port %s" |
12201 | Information | NIC |
"IP interface up" "IP interface %s up on controller %s NIC port %s" |
12202 | Warning | NIC |
"Group IP interface unavailable" "Group IP interface unavailable" |
12203 | Warning | NIC |
"All Data IP interfaces unavailable" "All Data IP interfaces unavailable" |
12204 | Critical | NIC |
"IP connectivity lost all links are down" |
12205 | Warning | NIC |
"Migrating subnet NIC configuration" "NIC %s for subnet %s does not exist. Migrating configuration to NIC %s. Edit configuration if necessary." |
12206 | Warning | NIC |
"NIC for subnet missing" "NIC %s for subnet %s does not exist. Edit configuration to ensure subnet is configured for an existing NIC." |
12207 | Warning | NIC |
"Migrating IP NIC configuration" "NIC %s for IP %s does not exist. Migrating configuration to NIC %s. Edit configuration if necessary." |
12208 | Warning | NIC |
"NIC for IP missing" "NIC %s for IP %s does not exist. Edit configuration to ensure IP is configured for an existing NIC." |
12209 | Warning | NIC |
"Migrating route NIC configuration" "NIC %s for route %s gateway %s does not exist. Migrating configuration to NIC %s. Edit configuration if necessary." |
12210 | Warning | NIC |
"NIC for route missing" "NIC %s for route %s gateway %s does not exist. Edit configuration to ensure route is configured for an existing NIC." |
12211 | Warning | NIC |
"Standby controller has better network connectivity. Failing services over to standby controller" "Standby controller has better network connectivity. Failing services over to standby controller" |
12212 | Warning | NIC |
"Duplicate IP Address Detected" "A duplicate of IP address %s is found in the network." |
12213 | Warning | NIC |
"Discovery IP interface unavailable" "Discovery IP interface unavailable" |
12214 | Warning | NIC |
"Target IP interfaces unavailable" "Target IP interfaces unavailable" |
12215 | Warning | NIC |
"Link down for Group IP interface(s)" "Link down for Group IP interface(s)" |
12216 | Warning | NIC |
"Link down for Discovery IP interface(s)" "Link down for Discovery IP interface(s)" |
12217 | Warning | NIC |
"Link down for Target IP interface(s)" "Link down for Target IP interface(s)" |
12218 | Warning | NIC |
"Link down for Data IP interface(s)" "Link down for Data IP interface(s)" |
12219 | Warning | NIC |
"Link down for iSCSI Data IP interface(s)" "Link down for iSCSI Data IP interface(s)" |
12220 | Warning | NIC |
"Link down for cluster Data IP interface(s)" "Link down for cluster Data IP interface(s)" |
12221 | Warning | NIC |
"Unresponsive NIC Port Detected" "NIC Port %s is unresponsive." |
12222 | Critical | NIC |
"IP connectivity lost all links down on a subnet" |
12223 | Critical | NIC |
"Network connectivity lost all links down on a subnet" |
12224 | Warning | NIC |
"NIC migration failed" "Migration of NIC port(s) %s failed. This could likely happen if array hardware updates resulted in reduced number of NICs." |
12301 | Warning | Temperature |
"Sensor: Alert raised" "%s : Min %d Max %d (over %d hours %d mins) Last Reading %d" |
12302 | Information | Temperature |
"Sensor: Alert cleared" "%s : Min %d Max %d (over %d hours %d mins) Last Reading %d" |
12303 | Warning | Temperature |
"Sensor: Alert raised" "%s : failure " |
12304 | Information | Temperature |
"Sensor: Alert cleared" "%s : failure cleared " |
12305 | Warning | Temperature |
"Sensor: is missing?: " "%s" |
12306 | Warning | NVRAM |
"NVRAM battery is disabled" "NVRAM Battery %d is disabled on controller %s" |
12307 | Critical | NVRAM |
"NVRAM batteries are disabled" "NVRAM %d batteries are disabled on controller %s" |
12308 | Information | NVRAM |
"NVRAM battery is OK" "NVRAM Battery %d is OK on controller %s" |
12310 | Warning | Temperature |
"System temperature is warm" "current temperature for ""sensor at %s is %d C" |
12311 | Warning | Temperature |
"System temperature is cold" "current temperature for ""sensor at %s is %d C" |
12312 | Information | Temperature |
"System temperature is ok" "System temperature is now ""within range: current temperature for sensor at %s is %d C" |
12313 | Warning | Temperature |
"Temperature sensor failed" "Temperature sensor at %s ""is not operational" |
12314 | Information | Temperature |
"Temperature sensor is ok" "Temperature sensor at %s is ""operational: current temperature is %d C" |
12315 | Information | Cooling Fan |
"Fan in high speed" "Fan at %s %s is running fast: ""current speed %d rpm" |
12316 | Information | Cooling Fan |
"Fan in low speed" "Fan at %s %s is running slow: ""current speed %d rpm" |
12317 | Information | Cooling Fan |
"Fan is ok" "Fan at %s %s is now running at speed ""%d rpm" |
12318 | Warning | Cooling Fan |
"Fan stopped" "Fan at %s %s stopped working" |
12319 | Warning | Cooling Fan |
"Fan missing" "Fan at %s %s is missing" |
12320 | Warning | Power Supply |
"Power supply fail" "Power supply at %s is either not ""connected or failed" |
12321 | Warning | Power Supply |
"Power supply missing" "Power supply at %s is missing" |
12322 | Information | Power Supply |
"Power supply is ok" "Power supply at %s is ok" |
12323 | Warning | Temperature |
"System temperature is warm" "current temperature for ""sensor \"%s\" at %s is %d C" |
12324 | Warning | Temperature |
"System temperature is cold" "current temperature for ""sensor \"%s\" at %s is %d C" |
12325 | Information | Temperature |
"System temperature is ok" "System temperature is now ""within range: current temperature for sensor \"%s\" at %s is ""%d C" |
12326 | Warning | Temperature |
"Temperature sensor failed" "Temperature sensor \"%s\" ""at %s is not operational" |
12327 | Information | Temperature |
"Temperature sensor is ok" "Temperature sensor \"%s\" ""at %s is operational: current temperature is %d C" |
12328 | Information | Cooling Fan |
"Fan in high speed" "Fan \"%s\" at %s %s is running ""fast: current speed %d rpm" |
12329 | Information | Cooling Fan |
"Fan in low speed" "Fan \"%s\" at %s %s is running ""slow: current speed %d rpm" |
12330 | Information | Cooling Fan |
"Fan is ok" "Fan \"%s\" at %s %s is now running ""at speed %d rpm" |
12331 | Warning | Cooling Fan |
"Fan stopped" "Fan \"%s\" at %s %s stopped working" |
12332 | Warning | Cooling Fan |
"Fan missing" "Fan \"%s\" at %s %s is missing" |
12333 | Warning | Power Supply |
"Power supply fail" "Power supply \"%s\" at %s is ""either not connected or failed" |
12334 | Warning | Power Supply |
"Power supply missing" "Power supply \"%s\" at %s is ""missing" |
12335 | Information | Power Supply |
"Power supply is ok" "Power supply \"%s\" at %s is ok" |
12336 | Warning | Temperature |
"System temperature is warm" "current temperature for ""sensor \"%s\" on shelf \"%s\" at %s is %d C" |
12337 | Warning | Temperature |
"System temperature is cold" "current temperature for ""sensor \"%s\" on shelf \"%s\" at %s is %d C" |
12338 | Information | Temperature |
"System temperature is OK" "System temperature is now ""within range: current temperature for sensor \"%s\" on shelf \"%s\" at %s is ""%d C" |
12339 | Warning | Temperature |
"Temperature sensor failed" "Temperature sensor \"%s\" ""on shelf \"%s\" at %s has failed" |
12340 | Information | Temperature |
"Temperature sensor is OK" "Temperature sensor \"%s\" ""on shelf \"%s\" at %s is operational: current temperature is %d C" |
12341 | Information | Cooling Fan |
"Fan is at high speed" "Fan \"%s\" on shelf \"%s\" at %s %s is running ""fast: current speed %d rpm" |
12342 | Information | Cooling Fan |
"Fan is at low speed" "Fan \"%s\" on shelf \"%s\" at %s %s is running ""slow: current speed %d rpm" |
12343 | Information | Cooling Fan |
"Fan is OK" "Fan \"%s\" on shelf \"%s\" at %s %s is now running ""at speed %d rpm" |
12344 | Warning | Cooling Fan |
"Fan stopped" "Fan \"%s\" on shelf \"%s\" at %s %s stopped working" |
12345 | Warning | Cooling Fan |
"Fan missing" "Fan \"%s\" on shelf \"%s\" at %s %s is missing" |
12346 | Warning | Power Supply |
"Power supply fail" "Power supply \"%s\" on shelf \"%s\" at %s is ""not connected or has failed" |
12347 | Warning | Power Supply |
"Power supply missing" "Power supply \"%s\" on shelf \"%s\" at %s is ""missing" |
12348 | Information | Power Supply |
"Power supply is OK" "Power supply \"%s\" on shelf \"%s\" at %s is OK" |
12601 | Warning | NVRAM |
"NVRAM battery is charging" "NVRAM battery is charging on controller %s" |
12602 | Information | NVRAM |
"NVRAM battery has finished charging" "NVRAM battery has finished charging on controller %s" |
12603 | Critical | NVRAM |
"NVRAM version is incompatible" "NVRAM version is incompatible with system firmware on controller %s" |
12604 | Error | NVRAM |
"NVRAM card multi-bit error (MBE) detected" "The NVRAM memory content is corrupted on controller %s" |
12605 | Warning | NVRAM |
"NVRAM card single-bit error (SBE) detected" "The NVRAM memory content is experiencing bit flips on controller %s" |
12606 | Error | NVRAM |
"NVRAM card non-correctable multi-bit error (MBE) detected" "The NVRAM memory content has experienced a non-correctable bit flip error on controller %s" |
12607 | Warning | NVRAM |
"NVRAM card correctable single-bit error (SBE) detected" "The NVRAM memory content has experienced a correctable bit flip error on controller %s" |
12608 | Information | NVRAM |
"NVDIMM reserved flash blocks reached the upper threshold" "The reserved flash blocks have reached the upper threshold (remaining = %d) on controller %s." |
12609 | Warning | NVRAM |
"NVDIMM reserved flash blocks reached the lower threshold" "The reserved flash blocks have reached the lower threshold (remaining = %d) on controller %s. Please contact Nimble Storage Support." |
12610 | Warning | NVRAM |
"NVDIMM ultracap cacapcitance discharged" "The NVDIMM ultracap capacitance is discharged (remaining = %d) on controller %s" |
12611 | Critical | NTB |
"NTB_BAD_LINK" "Controller %s %s in %s is higher than the threshold value of %d. Please Contact Nimble Storage Support." |
12612 | Warning | NVRAM |
"NVDIMM ultracap capacitance discharged" "The NVDIMM ultracap capacitance is discharged (remaining = %d) on controller %s. Please Contact Nimble Storage Support." |
12613 | Critical | NVRAM |
"NVRAM module missing" "NVRAM module is not detected on controller %s. Please contact Nimble Storage Support." |
12614 | Critical | NVRAM |
"NVDIMM ultracap capacitance discharged" "The NVDIMM ultracap capacitance is discharged on controller %s. Data is unsafe if power is lost. ""If this situation continues for %d minutes |
12615 | Critical | NVRAM |
"Access to encrypted volumes denied" "Access to encrypted volumes denied. You must re-enter the passphrase to access the encrypted volumes. If you have swapped out both controllers |
12701 | Warning | Shelf |
"Shelf controller connected to wrong side of host controller" "Controller %s of Shelf location % s |
12702 | Error | Shelf |
"Shelf SES device not ready" "SES device not ready for shelf serial %s location %s" |
12703 | Warning | Shelf |
"SAS link of a shelf slot is degraded" "SAS link of shelf serial %s location %s slot %s is degraded" |
12704 | Warning | Shelf |
"Not enough disk in shelf" "Shelf serial %s location %s does not have enough number of disks" |
12705 | Error | Shelf |
"System cannot read shelf serial number" "System cannot read the serial number from shelf at location %s" |
12706 | Error | Shelf |
"SAS cable connected to wrong port" "SAS cable s) that connected to shelf location %s is(are) connected to the wrong port(s |
12707 | Warning | Shelf |
"SAS link(s) between the shelves is(are) degraded" "SAS link(s) between shelf location %s and %s is(are) degraded" |
12708 | Warning | Shelf |
"SAS expander error" "SAS expander in shelf at location % s |
12709 | Error | Shelf |
"Shelf SAS loop detected" "Both shelf controllers A and B are connected to the same head controller at location %s and %s. ""Ensure that each controller on the shelf is connected to its head unit equivalent (A or B)" |
12710 | Warning | Shelf |
"Shelf appear only on one side of host controllers" "Shelf serial %s visible on host controller %s location %s but not on host controller % s |
12711 | Warning | Shelf |
"Shelf controller connection order mismatched" "Shelf serial %s is at location %s on host controller A but at location %s on host controller B. ""Connect both controllers on each shelf to the head or shelf in the same order" |
12712 | Error | Shelf |
"Cannot access shelf SES device" "Cannot access shelf SES device in the shelf serial %s at location % s |
12713 | Warning | Shelf |
"Controller failover due to shelf problem" "Controller failover due to shelf problem" |
12714 | Information | Shelf |
"New Shelf detected" "A new shelf is detected at location %s." |
12715 | Information | Shelf |
"Shelf is disconnected " "Shelf at location % s |
12716 | Warning | Shelf |
"Shelf chassis swap detected" "Shelf serial %s location %s replaced shelf serial %s" |
12717 | Warning | Shelf |
"Shelf daisy chain too long" "Shelf serial %s location %s exceeds maximum supported daisy chain length" |
12719 | Information | Shelf |
"Connection to shelf is restored" "SAS connection to shelf at location % s |
12720 | Warning | Shelf |
"SAS link disabled" "SAS phy %s on shelf at location %s has excessive link error and has been disabled" |
12721 | Warning | Shelf |
"Excessive link error on disk" "SAS link between disk sn %s and expander %s has excessive link error" |
12730 | Error | Shelf |
"SAS cable connected to wrong port" "SAS cable s) that connected to shelf location %s is(are) connected to the wrong port(s |
12731 | Error | Shelf |
"Cannot access shelf SES device" "Cannot access shelf SES device in the shelf serial %s at location % s |
12732 | Warning | Shelf |
"SAS link disabled" "SAS phy %s on shelf at location %s has excessive link errors and has been disabled." |
12733 | Warning | Shelf |
"Excessive link error on disk" "SAS link between disk S/N %s and expander %s has excessive link errors. Contact Nimble Storage Support." |
12734 | Warning | Shelf |
"SAS cable connected to wrong port" "SAS cable s) that connected to shelf location %s is(are) connected to the wrong port(s |
12735 | Warning | Shelf |
"Cannot access shelf SES device" "Cannot access shelf SES device in the shelf serial %s at location % s |
12736 | Warning | Shelf |
"Cannot access shelf SES device" "Cannot access shelf SES device in the shelf serial %s at location % s |
12738 | Warning | Shelf |
"Cannot access shelf SES device" "Cannot access shelf SES device in the shelf with S/N %s at location %s. Some sensor data ""may not be available. Contact Nimble Storage Support." |
12740 | Warning | Shelf |
"Cannot access shelf IPMI device" "Cannot access shelf IPMI device in the shelf with S/N %s at location %s. Some sensor data ""may not be available. Contact Nimble Storage Support." |
12741 | Warning | Shelf |
"SAS cable connected to wrong port" "SAS cable between shelf location %s and location %s is connected to wrong port." |
12742 | Warning | Shelf |
"Excessive link errors between disk and expander" "There are excessive link errors on the SAS link between disk slot %s and expander ""in the shelf %s. Contact Nimble Storage Support." |
12743 | Warning | Shelf |
"Shelf bad interconnect phy" "There are excessive link errors on the SAS link between %s and %s. ""Contact Nimble Storage Support." |
12744 | Warning | Shelf |
"Excessive link errors between shelves" "There are excessive link errors on the SAS link between %s and %s. ""Contact Nimble Storage Support." |
12901 | Critical | Controller |
"Physical memory detected is less than installed" "Physical memory detected is less than installed on array serial number %s controller %s. Installed %ld GB |
14000 | Information | Array |
"CS-Model changed" "The CS-Model has changed. The model is now %s." |
14001 | Warning | Array |
"CS-Model unknown" "The system cannot determine the CS-Model. The prior model was % s |
14002 | Warning | Temperature |
"The system temperature is beginning to exceed the allowable operating ""temperature. If it continues to exceed allowed operating temperature ""the system may shut down." |
14003 | Critical | Temperature |
"Controller shutdown occurred due to excessive temperature" "Temperature exceeds maximum operating temperature (50 Celsius) on controller % s |
14004 | Critical | Temperature |
"Controller exceeds allowable operating temperature" "Temperature exceeds allowable operating temperature on controller %s (%d Celsius)" |
14005 | Critical | Temperature |
"Backplane exceeds allowable operating temperature" "Temperature exceeds allowable operating temperature on backplane (%d Celsius)" |
14006 | Warning | Temperature |
"System temperature is too high." "Sensor %s on shelf %s at %s is %d Celsius. ""If any sensor exceeds 50 degrees C |
14007 | Critical | Temperature |
"System temperature continues to be high." "Temperature Sensor on shelf %s is %d Celsius. ""If any sensor exceeds 50 degrees C |
14008 | Critical | Power Supply |
"Power supply down revisioned" "While your shelf %s continues to function normally |
14009 | Critical | Temperature |
"Controller shutdown occurred due to excessive temperature" "Temperature exceeds maximum operating temperature (%lu) on controller % s |
14010 | Critical | Power Supply |
"Power supply down revisioned" "While your shelf %s continues to function normally |
14011 | Warning | Temperature |
"Array temperature is too high" "Temperature sensor %s on shelf %s at %s is %d Celsius. ""Check air temperature and air flow around the array." |
14012 | Critical | Temperature |
"Array temperature continues to be high" "Temperature sensor on shelf %s is %d Celsius. ""The shelf shuts down if it exceeds the maximum operating temperature." |
14013 | Critical | Power Supply |
"Power supply status unavailable" "Array software is unable to query status of power supply units (PSUs). Although the shelf S/N %s continues to function normally |
14014 | Critical | Power Supply |
"Power supply status unavailable" "Unable to query status of power supply units (PSUs). Although the shelf S/N %s continues to function normally |
14015 | Critical | Temperature |
"Array temperature continues to be high" "Temperature sensor on shelf %s is %d Celsius which exceeds the safe operating temperature of %d Celsius. ""Do not operate shelf under elevated temperatures. To ensure data protection |
14200 | Error | Controller |
"An unknown firmware version was detected" "An unknown firmware version was detected for component %s on controller %s" |
14400 | Information | FC |
"Fibre Channel link up" "Fibre Channel link up on controller %s port %s" |
14401 | Warning | FC |
"Fibre Channel link down" "Fibre Channel link down on controller %s port %s" |
14402 | Information | FC |
"Fibre Channel link not connected" "Fibre Channel link not connected on controller %s port %s" |
14403 | Information | FC |
"Fibre Channel link up with connection to fabric" "Fibre Channel link up with connection to fabric on controller %s port %s." |
14404 | Warning | FC |
"Fibre Channel link up with no connection to fabric" "Fibre Channel link up with no connection to fabric on controller %s port %s. Check the switch log files for errors." |
Replication | |||
---|---|---|---|
Alert/Event | Severity | Type | Description/Possible Cause/Actions |
11000 | Information | Partner |
"Replication succeeded" "Successfully replicated snapshot collection %s ""to partner %s" |
11001 | Information | Partner |
"Excessive replication delay" "Excessive delay replicating volume collection %s ""to partner %s" |
11002 | Warning | Partner |
"Excessive replication delay" "Excessive delay replicating volume collection %s ""to partner %s" |
11003 | Warning | Partner |
"Partner synchronization failed" "Failed to synchronize replication configuration ""to partner % s |
11004 | Warning | Partner |
"Volume replication stalled" "Replication is stalled. Volume %s on partner %s must be removed ""in order to proceed" |
11005 | Information | Partner |
"Volume collection handover completed" "Completed handover of volume collection %s" |
11006 | Warning | Partner |
"Replication between multi-array scaleout group"" and pre-scaleout array is not supported" "Cannot replicate from/to the pre-2.x partner %s from a multi-array group" |
11007 | Warning | Partner |
"Replication between a scaleout group"" and pre-scaleout array must be configured over the management network" "Cannot replicate from/to the pre-2.x partner %s over the data network." |
11008 | Error | Partner |
"Replication resynchronized" "Successfully resynchronized while replicating snapshot %s on volume %s ""from partner %s. Prior snapshots for this volume may be out of sync. ""Please contact Nimble Storage Support." |
11009 | Warning | Partner |
"Resynchronization not supported" "Downstream partner %s has requested resynchronization of replicated snapshots"" for volume %s. Please contact Nimble Storage Support for assistance." |
11010 | Warning | Partner |
"Resynchronization not supported" "Volume %s needs resynchronization from upstream partner %s. ""Contact Nimble Storage Support." |
11011 | Error | Partner |
"Replication resynchronized" "Successfully resynchronized while replicating snapshot %s on volume %s ""from partner %s. Prior snapshots for this volume may be out of sync. ""Contact Nimble Storage Support." |
11012 | Warning | Partner |
"Resynchronization not supported" "Downstream partner %s has requested resynchronization of replicated snapshots"" for volume %s. Contact Nimble Storage Support." |
11013 | Warning | Partner |
"Partner authentication failed" "Failed to authenticate with replication partner %s because partner secrets do not match."" Replication is currently paused. Edit the partner’s shared secret to resume replication." |
11014 | Warning | Partner |
"Replicated snapshot resynchronized" "Successfully resynchronized replicated snapshot %s of volume %s ""from partner %s. Prior snapshots for this volume may not be synchronized. ""Contact Nimble Storage Support." |
11015 | Warning | Partner |
"Replicated snapshot resynchronization not supported" "Downstream partner %s has requested resynchronization of replicated snapshots"" for volume %s. This group does not support resynchronization. Contact Nimble Storage Support." |
11016 | Warning | Partner |
"Replication partner authentication failed" "Failed to authenticate with replication partner %s because shared secret does not match."" Replication is currently paused. Edit partner and match the shared secret to resume replication." |
11017 | Error | Volume |
"Replicated volume needs resynchronization" "Snapshot %s of volume %s needs resynchronization from upstream partner. ""Contact Nimble Storage Support." |
11018 | Information | Partner |
"Volume collection handover aborted" "Aborted handover of volume collection %s" |
11019 | Information | Partner |
"Volume collection handover completed with errors." "Completed handover of volume collection % s |
11020 | Information | Partner |
"Volume collection handover aborted with errors." "Aborted handover of volume collection % s |
11021 | Information | Partner |
"Volume collection could not be deleted on the downstream replication partner." "Volume collection %s could not be deleted on the downstream replication partner and must be manually removed." |
11022 | Warning | Volume |
"Replication of volume is stalled due to space reclamation." "Replication is stalled for volume %s of volume collection %s. Volume must be deleted on the downstream for replication to continue." |
11023 | Warning | Volume |
"Replication of volume is stalled due to space reclamation on common snapshot." "Replication is stalled for volume %s of volume collection % s |
11024 | Warning | Volume |
"Replicated volume needs resynchronization" "Replicated volume %s needs resynchronization from upstream partner. ""Resynchronization on volume %s has been initiated." |
11025 | Information | Volume |
"Replicated volume resynchronized" "Successfully resynchronized replicated volume %s from partner %s." |
Security | |||
---|---|---|---|
Alert/Event | Severity | Type | Description/Possible Cause/Actions |
14806 | Warning | Controller |
"Root login succeeded." "Root login to controller %s from %s succeeded." |
14807 | Critical | Controller |
"Root login failed." "Root login to controller %s from %s failed." |
14808 | Warning | Controller |
"Login by nsupport succeeded" "Login by nsupport to controller %s from %s succeeded." |
14809 | Critical | Controller |
"Login by nsupport failed" "Login by nsupport to controller %s from %s failed." |
14810 | Warning | Controller |
"Elevating user privilege to root succeeded" "Elevating user privilege from %s to root on controller %s succeeded." |
14811 | Critical | Controller |
"Elevating user privilege to root failed" "Elevating user privilege from %s to root on controller %s failed." |
14812 | Note | Group |
"Login attempt by user without an assigned role" "Login attempt by Active Directory user %s failed. The Active Directory group to which user belongs to is not associated with a role on the Nimble Storage group %s. Associate an Active Directory group the user belongs to with a role on Nimble Storage group. Ensure that the role has appropriate privileges before attempting to log in again." |
Service | |||
---|---|---|---|
Alert/Event | Severity | Type | Description/Possible Cause/Actions |
0101 | Warning | Array |
"Low writable space" "The system is low on writable space. Write operations will be slowed. " |
0102 | Information | Array |
"Writable space reclaimed" "Writable space is sufficient |
0103 | Critical | Array |
"Critically low writable space" "The system is extremely low on writable space |
0104 | Warning | Array |
"High system utilization" "The system is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
0105 | Information | Array |
"System utilization OK" "The system is down to %d%% utilization." |
0106 | Critical | Array |
"Critically high system utilization" "The system is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
0107 | Critical | Array |
"Critically low writable space" "The system's writable space is extremely low. Application writes will be progressively slowed as writable space continues to decline." |
0110 | Critical | Array |
"Critically low writable space" "The system's writable space is too low for write operations. Application writes will time out." |
0111 | Critical | Array |
"Critically low writable space" "The array's writable space is extremely low. Application writes will be progressively slowed as writable space continues to decline." |
0112 | Critical | Array |
"Critically low writable space" "The array's writable space is too low for write operations. Application writes will time out." |
0113 | Critical | Array |
"Critically high system utilization" "The system is extremely low on space. Incoming writes will be denied." |
0114 | Critical | Array |
"Critically low space" "The space on the array is extremely low. Application writes will be progressively slowed as writable space continues to decline." |
0115 | Information | Array |
"Writable space sufficiently restored" "The space on the array has been sufficiently restored; write operations are back to normal speed." |
0116 | Critical | Array |
"Critically low space" "The space on the array is too low for write operations. Application writes will time out." |
2001 | Critical | Controller |
"Unhandled controller exception" "Unhandled exception on controller %s" |
2002 | Information | Controller |
"Controller takeover occurred" "Takeover occurred on controller %s" |
2003 | Information | Controller |
"Standby controller available" "Standby controller %s available" |
2004 | Warning | Controller |
"Standby controller not available" "Standby controller %s not available" |
2005 | Critical | Controller |
"Excessive controller restarts detected" "Excessive controller %s restarts detected" |
2006 | Critical | Controller |
"Restarting controller to recover service" "Restarting controller %s to recover %s service" |
2007 | Information | Controller |
"Rebooting controller on user request" "Rebooting controller %s on user request" |
2008 | Error | Controller |
"Failed to reboot controller per user request" "Failed to reboot controller %s per user request" |
2009 | Information | Controller |
"Halting controller on user request" "Halting controller %s on user request" |
2010 | Error | Controller |
"Failed to halt controller per user request" "Failed to halt controller %s per user request" |
2011 | Information | Controller |
"Standby controller not available" "Standby controller %s not available" |
2012 | Warning | Controller |
"Standby controller not available for an extended period" "Standby controller %s not available for an extended period" |
2013 | Warning | Controller |
"Unhandled controller exception" "Unhandled exception on controller %s" |
2014 | Critical | Controller |
"Unhandled controller exception all services are down" |
2015 | Warning | Controller |
"Standby controller not available for an extended period" "Standby controller %s not available for %d minutes" |
2016 | Critical | Controller |
"Standby controller not available for an extended period" "Standby controller %s not available for %d minutes" |
2017 | Warning | Controller |
"Controller takeover occurred" "Takeover occurred on controller %s" |
2018 | Information | Controller |
"Controller failover occurred" "Failover occurred on controller %s" |
2019 | Information | Controller |
"Controller failover occurred" "Failover of active role occurred on controller %s" |
2020 | Critical | Controller |
"Controller running with watchdog disabled" "Watchdog disabled on controller %s. Disconnect all connected clients and contact Nimble Storage Support immediately." |
2021 | Information | Controller |
"Controller failover occurred" "Failover of active role occurred on controller %s. Controller %s is now the active controller." |
2025 | Critical | Controller |
"Standby controller missing too many drives and cannot failover" "Shelf serial %s standby controller %s missing too many drives and cannot failover." |
2026 | Warning | Controller |
"Standby controller performance degraded on failover; missing afs" "Shelf serial %s standby controller %s performance degraded on failover; missing afs." |
2027 | Critical | Controller |
"Excessive controller restarts detected" "Excessive controller restarts detected. Controller %s is starting up in degraded mode. Some processes will be disabled. Contact Nimble Storage Support." |
2101 | Information | Service |
"Service started" "System services started. Software version is %s" |
2102 | Information | Service |
"Service stopped unexpectedly restarting" |
2103 | Warning | Service |
"Service stopped unexpectedly not restarting" |
2104 | Information | Service |
"Created secure tunnel to Nimble Storage support" "Created secure tunnel to Nimble Storage support on controller %s" |
2105 | Information | Service |
"Tunnel to Nimble Storage support has been terminated" "Tunnel to Nimble Storage support has been terminated on controller %s" |
2106 | Warning | Service |
"Service stopped unexpectedly" "The %s stopped unexpectedly on the array |
2107 | Warning | Service |
"Service stopped unexpectedly" "The %s stopped unexpectedly on the array |
2108 | Warning | Service |
"Failed to send alert e-mail" "Failed to send e-mail to % s |
2109 | Warning | Service |
"Failed to send alert e-mail" "Failed to send alert e-mail to SMTP server. Verify SMTP server and port configuration." |
2110 | Warning | Service |
"Service manually disabled" "The %s was manually disabled on an array controller and will not be started." |
2111 | Information | Service |
"Created secure tunnel to Nimble Storage Support" "Created secure tunnel to Nimble Storage Support on controller %s." |
2112 | Information | Service |
"Tunnel to Nimble Storage Support has been terminated" "Tunnel to Nimble Storage Support has been terminated on controller %s." |
10010 | Critical | Array |
"A member array became unreachable" "Member array %s became unreachable" |
10011 | Information | Array |
"A member array became reachable" "Member array %s became reachable" |
10012 | Critical | Array |
"A member array is unreachable" "Member array %s is unreachable" |
10013 | Information | Array |
"A member array is reachable" "Member array %s is reachable" |
10229 | Error | Pool |
"Failed to assign array to pool" "Failed to assign array %s to pool. Please retry after verifying that array is up and has network connectivity." |
10230 | Error | Pool |
"Failed to unassign array from pool" "Failed to unassign array %s from pool. Please retry after verifying that array is up and has network connectivity." |
10240 | Error | Pool |
"Failed to merge pools." "Failed to merge pool %s into pool. Please retry after verifying that all arrays in both pools are up and have network connectivity." |
10252 | Information | Pool |
"Completed unassign of array from pool" "Completed unassign of array %s from pool. All data on the array has been moved to other arrays in the pool. The array can now be assigned to other pools or removed from the group." |
10253 | Information | Pool |
"Completed unassign of array from pool" "Completed unassign of array %s from pool %s. All data on the array has been moved to other arrays in the pool. The array can now be assigned to other pools or removed from the group." |
10256 | Warning | Pool |
"Failed to assign array to pool" "Failed to assign array %s to pool %s. Retry after verifying that array is up and has network connectivity." |
10257 | Warning | Pool |
"Failed to unassign array from pool" "Failed to unassign array %s from pool %s. Retry after verifying that array is up and has network connectivity." |
10260 | Error | Pool |
"Failed to merge pools." "Failed to merge pool %s into pool %s. Retry after verifying that all arrays in both pools are up and have network connectivity." |
10282 | Critical | Volume |
"Insufficient cache capacity in the pool for cache pinned volumes" "Pinnable cache capacity %d MB in pool %s is insufficient to keep all cache pinned volumes in cache. Consider adding more cache or unpinning some volumes to restore performance guarantees for cache pinned volumes." |
10401 | Warning | Array |
"Used space above warning limit" "The amount of used space has reached %d%% of free space" |
10402 | Information | Array |
"Used space below warning limits" "The amount of used space is below %d%% of free space" |
10403 | Critical | Array |
"Used space above critical level" "The amount of used space has reached a critical level at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted" |
10404 | Information | Array |
"Used space below critical limits" "The amount of used space is at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted" |
10405 | Information | Array |
"Array space utilization OK" "The Array is down to %d%% space utilization." |
10406 | Information | Array |
"High array space utilization" "The array space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
10407 | Warning | Array |
"High array space utilization" "The array space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
10408 | Critical | Array |
"Critically high array space utilization" "The array space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
10409 | Warning | Pool |
"Used space in the pool above warning limit" "The amount of used space in the pool has reached %d%% of free space" |
10410 | Information | Pool |
"Used space in the pool below warning limits" "The amount of used space in the pool is below %d%% of free space" |
10411 | Critical | Pool |
"Used space in the pool above critical level" "The amount of used space in the pool has reached a critical level at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted" |
10412 | Information | Pool |
"Used space in the pool below critical limits" "The amount of used space in the pool is at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted" |
10413 | Information | Pool |
"Pool space utilization OK" "The pool is down to %d%% space utilization." |
10414 | Information | Pool |
"High pool space utilization" "The pool space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
10415 | Warning | Pool |
"High pool space utilization" "The pool space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
10416 | Critical | Pool |
"Critically high pool space utilization" "The pool space is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
10417 | Warning | Pool |
"Used space in the pool above warning limit" "The amount of used space in the pool %s has reached %d%% of free space." |
10418 | Information | Pool |
"Used space in the pool below warning limits" "The amount of used space in the pool %s is below %d%% of free space." |
10419 | Critical | Pool |
"Used space in the pool above critical level" "The amount of used space in the pool %s has reached a critical level at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted." |
10420 | Information | Pool |
"Used space in the pool below critical limits" "The amount of used space in the pool %s is at %d%% of free space. Volumes above their reserve will be taken offline once the free space has been exhausted." |
10421 | Information | Pool |
"Pool space utilization OK" "The pool %s is down to %d%% space utilization." |
10422 | Information | Pool |
"High pool space utilization" "The pool space in pool %s is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
10423 | Warning | Pool |
"High pool space utilization" "The pool space in pool %s is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
10424 | Critical | Pool |
"Critically high pool space utilization" "The pool space in pool %s is currently %d%% full. Consider deleting unneeded snapshots or volumes to reduce space usage." |
10435 | Warning | Pool |
"The amount of used space in the pool {param1} has reached {param2}% of free space." |
10436 | Information | Pool |
"The amount of used space in the pool {param1} is below {param2}% of free space." |
10437 | Critical | Pool |
"The amount of used space in the pool {param1} has reached a critical level at {param2}% of free space. Thinly provisioned volumes will be taken offline after the free space in the pool has been exhausted." |
10438 | Information | Pool |
"The amount of used space in the pool {param1} is at {param2}% of free space. Thinly provisioned volumes will be taken offline after the free space in the pool has been exhausted." |
12400 | Warning | Raid |
"RAID array degraded" "RAID array degraded by %d %s" |
12401 | Information | Raid |
"RAID array rebuild started" "RAID array started rebuilding disk %s" |
12402 | Information | Raid |
"RAID array rebuild is done" "RAID array has successfully ""completed rebuilding disk %s" |
12403 | Warning | Raid |
"RAID array rebuild failed" "Failed to rebuild RAID array on ""disk % s |
12404 | Warning | Raid |
"RAID array rebuild failed" "Failed to rebuild RAID array on ""disk % s |
12405 | Warning | Raid |
"Disks missing from RAID array" "%d %s missing from RAID ""array" |
12406 | Information | Raid |
"Disk marked as spare" "Disk %s is marked as spare" |
12407 | Critical | Raid |
"Could not assemble RAID array" "Could not assemble RAID array |
12408 | Warning | Raid |
"RAID array degraded" "RAID array degraded by %d %s on %s shelf %s" |
12409 | Information | Raid |
"RAID array rebuild started" "RAID array started rebuilding disk %s ""on %s shelf %s" |
12410 | Information | Raid |
"RAID array rebuild is done" "RAID array has successfully ""completed rebuilding disk %s on %s shelf %s" |
12411 | Warning | Raid |
"RAID array rebuild failed" "Failed to rebuild RAID array from ""%s shelf %s on disk % s |
12412 | Warning | Raid |
"RAID array rebuild failed" "Failed to rebuild RAID array from ""%s shelf %s on disk % s |
12413 | Warning | Raid |
"Disks missing from RAID array" "%d %s missing from RAID ""array on %s shelf %s" |
12414 | Information | Raid |
"Disk marked as spare" "Disk %s is marked as spare on %s shelf %s" |
12415 | Critical | Raid |
"Could not assemble RAID array" "Could not assemble RAID array on ""%s shelf % s |
12416 | Information | Raid |
"RAID array rebuild scheduled" "RAID array rebuild scheduled on disk %s ""of %s shelf %s" |
12417 | Information | Raid |
"RAID array rebuild stopped" "RAID array rebuild stopped on disk %s ""of %s shelf %s" |
12418 | Information | Raid |
"RAID array redundancy" "RAID array on %s shelf %s now has %d/%d disks |
12501 | Warning | iSCSI |
"Too many iscsi connections" "iscsi login rejected from %s" |
12502 | Warning | iSCSI |
"Too many unaligned iscsi reads/writes" "unaligned reads/writes percentage %.2f%% " |
12504 | Warning | iSCSI |
"Too many iSCSI connections" "iSCSI login rejected from %s" |
12505 | Warning | iSCSI |
"Too many unaligned iSCSI reads/writes" "unaligned reads/writes percentage %.2f%% " |
12506 | Warning | iSCSI |
"Too many iSCSI connections" "iSCSI login from %s is rejected" |
12718 | Information | Shelf |
"New shelf is activated" "Shelf serial %s at location %d has been activated" |
12737 | Information | Shelf |
"New shelf is activated" "Shelf serial %s at location %s has been activated" |
12739 | Information | Shelf |
"New shelf activated" "Shelf with S/N %s at location %s was activated" |
13501 | Information | Array |
"Group Leader role takeover succeeded" "Successfully takenover group leader role from array '%s' (serial: %s)" |
13504 | Information | Array |
"Group Leader role takeover succeeded" "Array %s (serial: %s) successfully took over group leader role from array %s (serial: %s)" |
13505 | Information | Array |
"Group Leader role take over succeeded" "Array %s S/N %s is now the group leader. Previous group leader was array %s S/N %s." |
13506 | Error | Array |
"Group Leader role migrate failed" "Array %s S/N: %s failed to migrate group leader role to array %s S/N: %s." |
13502 | Error | Array |
"Group Leader role takeover has been rejected by a member array" "Group Leader role takeover has been rejectec by member array '%s'" |
13503 | Error | Array |
"Group Leader role takeover has been rejected by a member array" "Group Leader role takeover has been rejected by member array '%s'" |
13601 | Information | Group |
"Group merge completed successfully" "Group merge with group %s completed successfully" |
13602 | Warning | Group |
"Failed to stop services on source group for group merge" "Failed to stop services on source group %s for group merge. Group merge operation would be rolled back. Retry the operation later." |
13603 | Information | Group |
"Completed rollback of group merge operation" "Completed rollback of group merge operation with group %s. Services on group %s have been resumed." |
13604 | Warning | Group |
"Group merge operation is not complete on some arrays operation would be retried" |
13605 | Warning | Group |
"Failed to merge configuration from source group" "Failed to merge configuration from source group %s. Group merge operation would be rolled back. Retry the operation later." |
13701 | Warning | Group |
"Data Migration is getting delayed because of continuous restarts" "Data Migration is getting delayed because of continuous restarts. Contact Nimble Storage Support." |
13702 | Warning | Group |
"Data migration is delayed because of repeated restarts" "Data migration is delayed because of repeated restarts. Contact Nimble Storage Support." |
13703 | Warning | Group |
"Data migration is delayed because of repeated errors" "Data migration is delayed because of repeated errors. Contact Nimble Storage Support." |
14700 | Warning | Service |
"Oldest events removed from the system" "Total number of events reached %lu. Maximum retention count is %lu. ""The oldest %lu events removed." |
14701 | Warning | Service |
"Events count reached warning threshold" "Events count reached warning threshold of %lu events. If the number of events ""reaches the maximum retention count of % lu |
14702 | Warning | Service |
"Oldest audit log records removed from the system" "Total number of audit log records reached %lu. Maximum retention count is %lu. ""The oldest %lu audit log records removed." |
14703 | Warning | Service |
"Audit log records count reached warning threshold" "Audit log records count reached warning threshold of %lu. If the number of audit log records ""reaches the maximum retention count of % lu |
14704 | Information | Service |
"Oldest events removed from the system" "Total number of events reached %lu. Maximum retention count is %lu. ""The oldest %lu events removed." |
14705 | Information | Service |
"Events count reached warning threshold" "Events count reached warning threshold of %lu events. If the number of events ""reaches the maximum retention count of % lu |
14706 | Information | Service |
"Oldest audit log records removed from the system" "Total number of audit log records reached %lu. Maximum retention count is %lu. ""The oldest %lu audit log records removed." |
14707 | Information | Service |
"Audit log records count reached warning threshold" "Audit log records count reached warning threshold of %lu. If the number of audit log records ""reaches the maximum retention count of % lu |
14800 | Warning | Controller |
"Root Login succeeded." "Root Login to controller %s from %s succeeded." |
14801 | Critical | Controller |
"Root Login failed." "Root Login to controller %s from %s failed." |
14802 | Warning | Group |
"Active Directory client service on this group is not running" "Active Directory client service on this group is not running. To restart the service |
14803 | Warning | Group |
"Active Directory Domain Controller is not reachable" "Active Directory Domain Controller for domain %s is not reachable. Contact your Active Directory administrator." |
14804 | Warning | Group |
"Could not authenticate with Active Directory Domain Controller" "Could not authenticate with Active Directory Domain Controller due to invalid credentials. Remove this group from the domain and retry join." |
14805 | Information | Group |
"Successfully communicated with Active Directory Domain Controller" "Successfully communicated with Active Directory Domain Controller." |
Test | |||
---|---|---|---|
Alert/Event | Severity | Type | Description/Possible Cause/Actions |
5000 | DBG | Test |
"Test alert" "Test message at debug level" |
5001 | Information | Test |
"Test alert" "Test message at info level" |
5002 | Error | Test |
"Test alert" "Test message at error level" |
5003 | Note | Test |
"Test alert" "Test message at \"not\" level" |
5004 | Note | Test |
"Test alert" "Test message at note level" |
5005 | Warning | Test |
"Test alert" "Test message at warn level" |
5006 | Critical | Test |
"Test alert" "Test message at critical level" |
5007 | Note | Test |
"Test alert" "Test message at notice level" |
5008 | Information | Test |
"Test alert" "Test recovery from warning alarm message" |
5009 | Information | Test |
"Test alert" "Test recovery from critical alarm message" |
Unknown | |||
---|---|---|---|
Alert/Event | Severity | Type | Description/Possible Cause/Actions |
10101 | Information | Array |
"Cache cleared by user" "Cache cleared by user" |
Update | |||
---|---|---|---|
Alert/Event | Severity | Type | Description/Possible Cause/Actions |
6000 | Error | Controller |
"Unpacking update package failed" "Unpacking update package failed on controller %s: %s" |
6001 | Information | Controller |
"Software update started" "Software update to version %s started on controller %s" |
6002 | Error | Controller |
"Reverting software to previous version" "Reverting software to previous version %s on controller %s" |
6003 | Information | Controller |
"Successfully updated software" "Successfully updated software to version %s on controller %s" |
6004 | Information | Controller |
"Rolling back software" "Rolling back software to version %s on controller %s" |
6005 | Error | Controller |
"Update package pre-check failed" "Update package Pre-check failed on controller %s" |
6007 | Error | Array |
"Software update failed" "Software update failed: %s" |
6008 | Information | Controller |
"Unpacking update package" "Unpacking version %s update package on controller %s" |
6009 | Information | Controller |
"Unpacked update package" "Unpacked version %s update package on controller %s" |
6010 | Information | Controller |
"Software update reboot" "%s on controller %s" |
6011 | Error | Array |
"Failed to download software update package" "Failed to download software update package: %s" |
6012 | Error | Controller |
"Software update failed. \"/tmp\" is full" "Software update failed. \"/tmp\" on controller %s is full" |
6013 | Error | Controller |
"Software update failed. scratch space is full" "Software update failed. scratch space on controller %s is full" |
6014 | Error | Controller |
"Software update failed. \"/var\" is full" "Software update failed. \"/var\" on controller %s is full" |
6015 | Error | Controller |
"Software update failed. Configuration space is full" "Software update failed. Configuration space on controller %s is full" |
6016 | Error | Controller |
"Software update failed. Recovery OS space is full" "Software update failed. Recovery OS space is full on controller %s is full" |
6017 | Error | Controller |
"Software update package was not found" "Software update package %s was not found on controller %s" |
6018 | Error | Controller |
"Software update package has wrong signature" "Software update package %s on %s controller %s has wrong signature" |
6019 | Error | Controller |
"Software update package has wrong checksum" "Software update package %s on %s controller has wrong checksum" |
6020 | Error | Controller |
"Software update precheck failed. Network connectivity will degrade after software update" "Software udpate precheck failed. Network connectivity will degrade on controller %s after software update" |
6021 | Error | Controller |
"Software update failed. Update cannot be applied while services cannot be failed over to other controller" "Software update failed. Update cannot be applied while services cannot be failed over to other controller. ""Controller %s is not in standby mode and cannot take over services." |
6022 | Error | Controller |
"Software update cannot be applied." "Software update cannot be applied. Controller %s is not in standby mode and cannot take over services that are required for a successful update." |
6023 | Error | Controller |
"Software update precheck failed. Network connectivity will degrade after software update" "Software update precheck failed. Network connectivity will degrade on controller %s after software update" |
6024 | Error | Controller |
"Software update precheck failed. RAID assembly failed on standby controller and prevents software update to proceed" "Software update precheck failed. RAID assembly failed on standby controller %s and prevents software update to proceed" |
6025 | Note | Controller |
"Software update started" "Software update to version %s started on controller %s" |
6026 | Note | Controller |
"Successfully updated software" "Successfully updated software to version %s on controller %s" |
6401 | Warning | Array |
"Software download failed due to DNS errors" "Software download failed due to DNS lookup failure on controller %s for host %s" |
6501 | Warning | Array |
"Failed to contact a member array during software update" "Failed to contact member %s during software update" |
6502 | Warning | Array |
"Failed to update software on a member array" "Failed to update software on member array %s" |
6503 | Warning | Array |
"Software update on a member array timed out" "Software update on member array %s timed out after %d minutes" |
6504 | Note | Array |
"Removed conflicting IQN that was added during software upgrade" "Removed conflicting IQN %s that was added during software upgrade." |
Volume | |||
---|---|---|---|
Alert/Event | Severity | Type | Description/Possible Cause/Actions |
10228 | Warning | Volume |
"Volume attributes synchronization to arrays in the pool delayed" "Volume %s attributes synchronization to arrays in the pool delayed. Will retry" |
10241 | Information | Volume |
"Volume attributes synchronization to arrays in the pool succeeded" "Volume %s attributes synchronization to arrays in the pool succeeded." |
10242 | Warning | Volume |
"Snapshot attributes synchronization to arrays in the pool delayed" "Snapshot %s in Volume %s attributes synchronization to arrays in the pool delayed. Will retry" |
10243 | Information | Volume |
"Snapshot attributes synchronization to arrays in the pool succeeded" "Snapshot %s in Volume %s attributes synchronization to arrays in the pool succeeded." |
10250 | Information | Volume |
"Volume completed move to destination pool" "Volume %s completed move to destination pool %s. Volume data is now on destination pool." |
10251 | Information | Volume |
"Volume completed aborting move to destination pool" "Volume %s completed aborting move to destination pool %s. Volume data has been moved back to source pool %s." |
10278 | Critical | Volume |
"Invalid volume serial number detected" "Volume %s is being taken offline because it is ""using an invalid serial number %s. Contact ""Nimble Storage Support." |
10279 | Critical | Volume |
"Invalid snapshot serial number detected" "Snapshot %s of volume %s is being taken offline because it is ""using an invalid serial number %s. Contact Nimble Storage Support." |
10283 | Warning | Folder |
"Folder attributes synchronization to arrays in the pool delayed" "Folder %s attributes synchronization to arrays in the pool delayed. Will retry" |
10284 | Information | Folder |
"Folder attributes synchronization to arrays in the pool succeeded" "Folder %s attributes synchronization to arrays in the pool succeeded." |
10294 | Critical | Volume |
Volume {param1} is being taken offline because it is thinly provisioned and the pool is out of free space" |
10295 | Critical | Volume |
"Volume {param1} is being set to non-writable because it is thinly provisioned and the pool is out of free space" |
10296 | Information | Volume | "Volume {param1} reserve has been converted from {param2}% reserve to a {param3}% provisioning level due to software upgrade" |
10300 | Information | Protection Set |
"Scheduled snapshot succeeded" "Successfully snapshoted volumes associated with ""volume collection %s schedule %s" |
10301 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to snapshot volumes associated with volume collection %s ""schedule % s" |
10302 | Information | Protection Set |
"Scheduled snapshot skipped" "Skipped scheduled snapshot collection % s |
10303 | Information | Protection Set |
"Scheduled snapshot skipped" "Skipped scheduled snapshot on volumes associated with ""volume collection %s schedule % s |
10304 | Information | Protection Set |
"Scheduled snapshot succeeded" "Successfully snapshoted volumes associated with ""volume collection %s schedule % s |
10305 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the system is unable to log into the vCenter ""server due to an incorrect user name %s or password. Verify the ""user name and password are correct." |
10306 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the connection to the vCenter server %s timed ""out. Verify the vCenter server name and IP address." |
10307 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because vCenter server %s refused the connection." |
10308 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because vCenter server %s is disconnected from the ""Nimble Protection Manager." |
10309 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because no route was found to vCenter server %s." |
10310 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the socket read from vCenter server %s timed out." |
10311 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the network is unreachable." |
10312 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because snapshots are disabled. Some VMWare products |
10313 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because %s does not exist." |
10314 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because %s does not have permission to perform the ""operation. Configure user with the proper permissions or log in as a ""user with such permissions." |
10315 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the system was unable to look up the vCenter ""server %s. Verify the vCenter server name or IP address." |
10316 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s due to an encoding error |
10317 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the server socket was closed before a reply ""was written." |
10318 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because no Datacenter exists." |
10319 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because Nimble volume serial number is empty." |
10320 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s due to an unexpected error." |
10321 | Warning | Protection Set |
"Scheduled snapshot succeeded with warning" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the VMFS datastore block size is not large enough ""to accommodate the files in the VM. For VMFS-5 datastore the maximum file ""size is 2TB minus 512 bytes. For the VMFS-3 datastore the maximum file ""size will depend on the block size of the datastore." |
10322 | Information | Protection Set |
"Scheduled snapshot succeeded" "Successfully created snapshot of volumes associated with ""volume collection %s schedule %s" |
10323 | Information | Protection Set |
"Scheduled snapshot succeeded" "Successfully created snapshot of volumes associated with ""volume collection %s schedule % s |
10324 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because snapshots are disabled. Some VMware products |
10325 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s since the vCenter virtual machine snapshot tasks have not yet completed." |
10326 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the snapshot name exceeds the maximum allowable ""length on vCenter. Shorten the volume collection name or schedule name." |
10327 | Information | Protection Set |
"Application synchronization failed" "Application synchronization failed for volume collection %s ""schedule % s |
10328 | Warning | Protection Set |
"Scheduled snapshot failed." "Failed to snapshot volumes associated with volume collection % s |
10340 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because %s does not have permission to perform the ""operation. Configure user with the proper permissions or log in as a ""user with such permissions." |
10341 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because %s does not exist." |
10342 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s due to an encoding error |
10343 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because the server socket was closed before a reply ""was written." |
10344 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because no Datacenter exists." |
10345 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because Nimble volume serial number is empty." |
10346 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s due to an unexpected error." |
10347 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because the VMFS datastore block size is not large enough ""to accommodate the files in the VM. For VMFS-5 datastore the maximum file ""size is 2TB minus 512 bytes. For the VMFS-3 datastore the maximum file ""size will depend on the block size of the datastore." |
10348 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because snapshots are disabled. Some VMware products |
10349 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s since the vCenter virtual machine ""snapshot tasks have not yet completed." |
10350 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because the snapshot name exceeds ""the maximum allowable length on vCenter. Shorten the volume collection ""name or schedule name." |
10351 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s because virtual machine tools ""in the guest are not running." |
10352 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the IP address or hostname %s is not a valid ""vCenter server." |
10353 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s. Too many vCenter synchronized snapshots are currently in progress. ""Stagger the schedules for vCenter synchronized snapshots." |
10354 | Warning | Protection Set |
"Scheduled snapshot failed" "Failed to create VSS synchronized snapshot associated with volume collection %s ""schedule %s. Incompatible version of Nimble VSS service on the application server." |
10355 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the system is unable to log into the vCenter ""server due to an incorrect user name %s or password. Verify the ""user name and password are correct." |
10356 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the connection to the vCenter server %s timed ""out. Verify the vCenter server name and IP address." |
10357 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because vCenter server %s refused the connection." |
10358 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because vCenter server %s is disconnected from the ""Nimble Protection Manager." |
10359 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because no route was found to vCenter server %s." |
10360 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the socket read from vCenter server %s timed out." |
10361 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the network is unreachable." |
10362 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s because the system was unable to look up the vCenter ""server %s. Verify the vCenter server name or IP address." |
10363 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s due to an unexpected connection error." |
10364 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s since the vCenter virtual machine snapshot tasks have not yet completed." |
10365 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s due to an unexpected error." |
10366 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s due to an unexpected error. ""See vSphere Client to get details on the failure of the snapshot task for this VM." |
10367 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s ""schedule %s for virtual machine %s due to failure to quiesce the virtual machine. ""See vSphere Client to get details on the failure of the snapshot task for this VM." |
10368 | Warning | Protection Set |
"Failed to synchronize with VMware vCenter" "Failed to %s vCenter snapshot associated with volume collection %s schedule %s for virtual machine %s due to a retained snapshot. For a given volume collection and schedule |
10380 | Warning | Protection Set |
"Scheduled VSS snapshot failed." "Failed to create snapshot of volumes associated with volume collection %s ""schedule %s because of VSS writer failure. %s" |
10381 | Warning | Protection Set |
"VSS synchronization failed for some of the application objects." "Successfully created snapshot of volumes associated with volume collection %s ""Schedule %s. However |
10382 | Warning | Protection Set |
"Scheduled VSS snapshot failed." "Failed to create snapshot of volumes associated with volume collection %s ""schedule %s because of a configuration error. %s" |
10383 | Warning | Protection Set |
"Scheduled VSS snapshot failed." "Failed to create snapshot of volumes associated with volume collection %s ""schedule %s because of an error during snapshot verification process. %s" |
10384 | Warning | Protection Set |
"Scheduled VSS snapshot failed." "Failed to create snapshot of volumes associated with volume collection %s ""schedule %s. %s" |
10385 | Warning | Protection Set |
"Scheduled VSS snapshot failed." "Failed to create snapshot of volumes associated with volume collection %s ""schedule %s. %s" |
10386 | Warning | Protection Set |
"Scheduled VSS snapshot failed." "Failed to create snapshot of volumes associated with volume collection %s ""schedule %s. %s" |
12500 | Information | iSCSI |
"Multi initiator login" "iscsi login to volume %s rejected from %s - existing session from %s" |
12503 | Information | iSCSI |
"Multi initiator login" "iSCSI login to volume %s rejected from %s - existing session from %s" |
12057 | Error | iSCSI |
"iSCSI connections from initiator repeatedly closed by array due to improper target ""IP configuration" "iSCSI connections from initiator %s on volume %s repeatedly closed by array due to ""improper target IP configuration. Review iSCSI connection settings on initiator ""and use the correct target IP. Consider using Nimble Connection Manager to manage ""initiator connections" |
12508 | Error | iSCSI |
"iSCSI connections from initiator repeatedly closed by array due to improper target ""IP configuration" "iSCSI connections with source IP %s and destination IP %s from initiator %s on ""volume %s repeatedly closed by the array. Review iSCSI connection settings on the initiator ""and use the correct target IP." |
13101 | Warning | Array |
"Total number of volumes approaching system limit" "Total number of volumes is %ld which is approaching system limit of %ld" |
13102 | Information | Array |
"Total number of volumes below warning threshold" "Total number of volumes is %ld which is below warning threshold of %ld" |
14850 | Information | Volume |
"Volume fully pinned in cache" "Volume %s fully pinned in cache." |
14851 | Information | Array |
"Pinning of cache pinned volumes may have been affected by a Data Service restart" "Pinning of cache pinned volumes on array %s may have been affected by a Data Service restart. Blocks in any affected cache pinned volumes are being restored to cache." |
14852 | Information | Array |
"Pinning of cache pinned volumes may have been affected by an SSD loss" "Pinning of cache pinned volumes on array %s may have been affected by an SSD loss. Blocks in any affected cache pinned volumes are being restored to cache |
14853 | Warning | Array |
"Pinning of cache pinned volumes may have been affected by an internal error" "Pinning of cache pinned volumes on array %s may have been affected by an internal error. Contact Nimble Storage Support." |
14854 | Information | Array |
"Blocks in any affected cache pinned volumes have been restored to cache" "Blocks in any affected cache pinned volumes on array %s have been restored to cache." |
14855 | Warning | Array |
"Pinning of cache pinned volumes has been affected by an SSD loss" "Pinning of cache pinned volumes on array %s has been affected by an SSD loss. Consider replacing SSD or unpinning some volumes." |