Updating array OS Workflow
The array OS is the software that runs on the array. HPE Storage provides regular maintenance releases and periodic updates to the array OS. Before you configure your array, be sure you have the latest version of the array OS installed.
If an array OS update is available for your array, you can download it now and install it later. The CLI has an automated procedure to install updates.
The following table describes the workflow for updating the array OS software on an array:
| Step | Notes | |
|---|---|---|
| 1. | Find the Array OS Version | You must note the version of the array OS currently running on your array to help you select the right update. |
| 2. | Update the Array OS | Installs the array OS software
update on the array. To perform this task, the array must have access to
the HPE InfoSight over an Internet connection.
NOTE: If your array does not have access to HPE InfoSight,
you can still manually download the array OS software from a PC or
other workstation with an Internet connection, then update the array
OS using the GUI. For more information, refer to the GUI Administration Guide.
|
| 3. | Verify the Array OS Update | After the aray OS update has finished, verify that the update was successful. |